 T/C barrel bolts
#98121
12/17/2011 5:20 AM
|
Joined: Dec 2010
Posts: 14
Shauncopeland
OP
stranger
|
|
OP
stranger
Joined: Dec 2010
Posts: 14 |
anyone have idea where to get bolts for contender g1 barrel t/c no longer carries them and brownells, midway, and numrich does not carry them any help would be appreciated
*T/C Contender
- 7-30waters super 14
- 44mag super 14
- 44mag. 10'' magna ported
- 45/.410 10''
- 45/.410 10'' vent rib
- 7mm TCU
- 45-70 SSK 12.5" w/ TSOB
*Ruger Redhawk .454 Casull
|
|
|
|
Re: T/C barrel bolts
[Re: Shauncopeland]
#98122
12/17/2011 5:22 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
Check with Mike Bellm if anyone has them he does.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
|
Re: T/C barrel bolts
[Re: wapitirod]
#98123
12/17/2011 5:23 AM
|
Joined: Dec 2010
Posts: 14
Shauncopeland
OP
stranger
|
|
OP
stranger
Joined: Dec 2010
Posts: 14 |
*T/C Contender
- 7-30waters super 14
- 44mag super 14
- 44mag. 10'' magna ported
- 45/.410 10''
- 45/.410 10'' vent rib
- 7mm TCU
- 45-70 SSK 12.5" w/ TSOB
*Ruger Redhawk .454 Casull
|
|
|
|
Re: T/C barrel bolts
[Re: wapitirod]
#98125
12/17/2011 5:31 AM
|
Joined: Jan 2004
Posts: 9,608
s4s4u
Shootist
|
|
Shootist
Joined: Jan 2004
Posts: 9,608 |
Check with Mike Bellm if anyone has them he does. Yep. And if by chance he is without, I have a couple of other sources. When in doubt just ask ;-)
Rod, too.
Short cuts often lead to long recoveries.
|
|
|
|
Re: T/C barrel bolts
[Re: s4s4u]
#98161
12/18/2011 12:30 AM
|
Joined: Dec 2010
Posts: 14
Shauncopeland
OP
stranger
|
|
OP
stranger
Joined: Dec 2010
Posts: 14 |
Bellm did not have any they get theirs from numrich which is out
*T/C Contender
- 7-30waters super 14
- 44mag super 14
- 44mag. 10'' magna ported
- 45/.410 10''
- 45/.410 10'' vent rib
- 7mm TCU
- 45-70 SSK 12.5" w/ TSOB
*Ruger Redhawk .454 Casull
|
|
|
|
Re: T/C barrel bolts
[Re: Shauncopeland]
#98162
12/18/2011 1:01 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
I'm surprised, I guess if s4s4u has other ideas you'll have to check them out. The only other idea would be to have a machine shop make them for you but I have no idea what they would charge.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
|
Re: T/C barrel bolts
[Re: Shauncopeland]
#98172
12/18/2011 2:11 AM
|
Joined: Jan 2004
Posts: 9,608
s4s4u
Shootist
|
|
Shootist
Joined: Jan 2004
Posts: 9,608 |
Bellm did not have any they get theirs from numrich which is out
To be clear, we are talking about the locking bolts? I know a couple of guys.
Rod, too.
Short cuts often lead to long recoveries.
|
|
|
|
Re: T/C barrel bolts
[Re: s4s4u]
#98177
12/18/2011 3:27 AM
|
Joined: Dec 2010
Posts: 14
Shauncopeland
OP
stranger
|
|
OP
stranger
Joined: Dec 2010
Posts: 14 |
yes the 2 piece ones i have new rollers on the way just noone has the bolts
*T/C Contender
- 7-30waters super 14
- 44mag super 14
- 44mag. 10'' magna ported
- 45/.410 10''
- 45/.410 10'' vent rib
- 7mm TCU
- 45-70 SSK 12.5" w/ TSOB
*Ruger Redhawk .454 Casull
|
|
|
|
Re: T/C barrel bolts
[Re: Shauncopeland]
#98201
12/18/2011 1:24 PM
|
Joined: Jan 2004
Posts: 259
Shortgun
enthusiast
|
|
enthusiast
Joined: Jan 2004
Posts: 259 |
Try SSK Industries
sskindustries.com
|
|
|
|
Re: T/C barrel bolts
[Re: Shortgun]
#98237
12/18/2011 10:16 PM
|
Joined: Sep 2011
Posts: 92
daywolf
journeyman
|
|
journeyman
Joined: Sep 2011
Posts: 92 |
Unfortunatly,Smith and Wesson,Springfield,Ma. is the new owners of T/C, and they will require you to send the barrels and frame to them to have them match up locking lugs for each to make them all work. Are you sure it's the lugs or breech space-head space? Are you getting misfires?
FREEDOM No words spoken holds greater hope demands greater sacrifice needs more to be loved bless more the giver curse more the destroyer or came closer to being Gods will on earth WORTH FIGHTING FOR!
|
|
|
|
Re: T/C barrel bolts
[Re: daywolf]
#98282
12/19/2011 4:07 AM
|
Joined: Dec 2010
Posts: 14
Shauncopeland
OP
stranger
|
|
OP
stranger
Joined: Dec 2010
Posts: 14 |
they are busted it was barrel purchased at gun show i talked to T/C- smith&wesson and they said they are no longer making them and dont know what to tell me to do
*T/C Contender
- 7-30waters super 14
- 44mag super 14
- 44mag. 10'' magna ported
- 45/.410 10''
- 45/.410 10'' vent rib
- 7mm TCU
- 45-70 SSK 12.5" w/ TSOB
*Ruger Redhawk .454 Casull
|
|
|
|
Re: T/C barrel bolts
[Re: Shauncopeland]
#98288
12/19/2011 5:27 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
how badly are they busted, are the pieces there where they could be put together to have a full piece? If so any qualified machine shop especially with CNC equipment should be able to make them for you but cost is another issue. I've seen shops charge next to nothing for stuff you'd think would be expensive and vice versa but it dosn't hurt to ask. With the way things are going it may bet to a point with the t/c stuff that some parts may have to fabricated unless an aftermarket source pops up. By the way have you tried EABCO?
Last edited by wapitirod; 12/19/2011 5:27 AM.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
|
Re: T/C barrel bolts
[Re: wapitirod]
#98384
12/21/2011 1:26 AM
|
Joined: Jul 2009
Posts: 779
Okie Hunter
old hand
|
|
old hand
Joined: Jul 2009
Posts: 779 |
Check out Eds Contenders at edstc.com. He has alot of hard to find TC parts. Nice guy too.
With God all things are possible. Matt.19:26
|
|
|
|
Re: T/C barrel bolts
[Re: Okie Hunter]
#98398
12/21/2011 3:56 AM
|
Joined: Dec 2010
Posts: 14
Shauncopeland
OP
stranger
|
|
OP
stranger
Joined: Dec 2010
Posts: 14 |
*T/C Contender
- 7-30waters super 14
- 44mag super 14
- 44mag. 10'' magna ported
- 45/.410 10''
- 45/.410 10'' vent rib
- 7mm TCU
- 45-70 SSK 12.5" w/ TSOB
*Ruger Redhawk .454 Casull
|
|
|
|
Re: T/C barrel bolts
[Re: Shauncopeland]
#98506
12/22/2011 8:00 PM
|
Joined: Jan 2004
Posts: 4,155
Gregg Richter
Distinguished Expert
|
|
Distinguished Expert
Joined: Jan 2004
Posts: 4,155 |
Unfortunately it sounds like T/C's lifetme warranty on the Contenders (whether was actually in force or more out of great customer service through the years) is no longer in effect.
|
|
|
|
Re: T/C barrel bolts
[Re: Gregg Richter]
#98763
12/26/2011 6:25 AM
|
Joined: Dec 2010
Posts: 14
Shauncopeland
OP
stranger
|
|
OP
stranger
Joined: Dec 2010
Posts: 14 |
ok i got back in touch with T/C Wednesday and talked to managment and told them my honest opinion of how i felt about the situation and they decided they had the locking bolts.. At first they said i could send barrels in and they would fix it I told them i would just send in bad locking bolts then he decided that he could just send them to me plus 3 extra sets. Im glad since i have 7 barrels. Thanks everyone for the help and suggestions.
*T/C Contender
- 7-30waters super 14
- 44mag super 14
- 44mag. 10'' magna ported
- 45/.410 10''
- 45/.410 10'' vent rib
- 7mm TCU
- 45-70 SSK 12.5" w/ TSOB
*Ruger Redhawk .454 Casull
|
|
|
|
Re: T/C barrel bolts
[Re: Shauncopeland]
#98764
12/26/2011 6:31 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
Excellent, glad you got them to cough them up but they should have done it the first time around.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
|
|
0 registered members (),
63
guests, and 3
spiders. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
