.454 Mag Tech
#152771
12/02/2014 9:35 PM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
I have a FA .454 and I'm having trouble with the cases sticking in the cylinder. I haven't had it long enough to try different ammo in it but the trouble is with the Mag Tech brand factory ammo, I never had any trouble with there ammo before so I don't know if it's the cylinder or the ammo,I'm going to try a different brand when I have time but I was just wondering if anyone else had this trouble. I cleaned the chambers on the cylinder and that didn't seem to help
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#152773
12/02/2014 10:11 PM
|
Joined: Apr 2005
Posts: 6,963
KRal
Shootist
|
Shootist
Joined: Apr 2005
Posts: 6,963 |
FA's cylinders are tight tolerances. All of mine require ejector rod to remove cases; they won't just fall out. This goes for every caliber I own. I don't know to what extent your cases are sticking, so....
I've shot mag-techs 260 gr 454 casull loads in mine and they extracted no different from my handloads.
It takes 43 muscles to frown and 17 to smile, but only 3 for proper trigger squeeze.
|
|
|
Re: .454 Mag Tech
[Re: KRal]
#152776
12/02/2014 10:34 PM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
well I had to take the cylinder out and use a drift to knock them out! I have a .475 FA also and have never had trouble like that, it really suprised me that happend it was in 2 chambers. They only came out about 1/2 inch and then I had to drive them out the rest of the way
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#152778
12/02/2014 11:01 PM
|
Joined: Jan 2004
Posts: 4,155
Gregg Richter
Distinguished Expert
|
Distinguished Expert
Joined: Jan 2004
Posts: 4,155 |
That seems a bit over the top for sure; I would contact Magtech and see if anyone else has reported that trouble. They are probably going to ask you for the Lot Number which should be somewhere on the box; maybe on the back side of the end flaps.
|
|
|
Re: .454 Mag Tech
[Re: Gregg Richter]
#152779
12/02/2014 11:17 PM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
It's worth a call that's for sure, I bought a box of Federal bonded bear claw's that I'm going to try
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#152780
12/02/2014 11:36 PM
|
Joined: Jan 2004
Posts: 4,155
Gregg Richter
Distinguished Expert
|
Distinguished Expert
Joined: Jan 2004
Posts: 4,155 |
Keep us posted on what you find out.
|
|
|
Re: .454 Mag Tech
[Re: Gregg Richter]
#152781
12/02/2014 11:40 PM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
I sure will, thanks for the info
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#152784
12/03/2014 12:57 AM
|
Joined: Apr 2005
Posts: 6,963
KRal
Shootist
|
Shootist
Joined: Apr 2005
Posts: 6,963 |
well I had to take the cylinder out and use a drift to knock them out! ...... Wow! I haven't had to use a hammer and dial. Something is surely not to par. I wasn't sure if you were new to FA's or not; so I started with elementary tips.
It takes 43 muscles to frown and 17 to smile, but only 3 for proper trigger squeeze.
|
|
|
Re: .454 Mag Tech
[Re: KRal]
#152798
12/03/2014 4:42 AM
|
Joined: Nov 2009
Posts: 1,116
GlennS
old hand
|
old hand
Joined: Nov 2009
Posts: 1,116 |
Did you have any oil in the chambers??? That will cause what you are describing....
"Better to Remain Silent and Be Thought a Fool than to Speak and Remove All Doubt"
|
|
|
Re: .454 Mag Tech
[Re: GlennS]
#152808
12/03/2014 1:28 PM
|
Joined: Jun 2008
Posts: 976
doc with a glock
old hand
|
old hand
Joined: Jun 2008
Posts: 976 |
Ryan,
Did you shoot any 45 Colts in those chambers prior to the 454 C cartridges? An obvious issue I'm sure you thought about; however, sometimes missed.
Doc
|
|
|
Re: .454 Mag Tech
[Re: doc with a glock]
#152810
12/03/2014 1:51 PM
|
Joined: Sep 2012
Posts: 526
sw282
addict
|
addict
Joined: Sep 2012
Posts: 526 |
Hi Ryan...Pls take some ''0000'' steel wool and polish a couple of the Magtech cases and try the firing drill again. Also pls ck/clean cyl again..lf it happens again call Magtech...
282
|
|
|
Re: .454 Mag Tech
[Re: sw282]
#152812
12/03/2014 2:15 PM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
I did fire a few .45 Colt's through it when I first got it and then I cleaned the heck out of the cylinder before I shot the Magtechs so that's why I'm lost on this deal. I'm going to clean it up again and try the Federal ammo and if it doesn't change I'll be giving Freedom Arms a call. I bought the gun used and it's in really nice shape and it is a Premier Grade
|
|
|
Re: .454 Mag Tech
[Re: sw282]
#152832
12/03/2014 9:29 PM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
that's kinda why I wanted to try some other ammo first before I did anything else, I've shot quite a bit of Magtech over the years and never had any trouble so maybe I just got a hold of a bad lot or something, A guy suggested earlier that I call Magtech and check the lot number with them. I bought about 5 boxes of the stuff at a store that was closing here in OKC about 2 months ago so I can't take it back now!
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#152842
12/04/2014 12:04 AM
|
Joined: Jan 2010
Posts: 3,755
johnwilliams
Shooting Master
|
Shooting Master
Joined: Jan 2010
Posts: 3,755 |
I use mag tech brass all the time for my Casull and .500 S & W mag.Encore.I know Mag Tech loads em to max on the factory loads,my lot ,back in 2000 was pushing 1860 f.p.s. with a 260 s.p. out of my 7 1/2 SRH and I never had issues.I would call mag tech and see what they have to say could've had some hotter lots go out ,ya never know.
H.H.I.#8190 Colossians 1:17 And He is before all things,and by Him all things consist!
|
|
|
Re: .454 Mag Tech
[Re: johnwilliams]
#152866
12/04/2014 3:36 AM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
It's been years since I've fired a .454 but the recoil with these loads is all there I noticed! They may be extra hot I really can't say but it seems to have quite a bit sharper recoil than my 6 inch FA .475 does with the factory 400 grain Hornady loads
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#153991
12/26/2014 3:27 PM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
Went out and ran some Federal .454 ammo through my FA yesterday and everything went great so it's the Magtech ammo so I think I'll try to email them with the lot number and see what they say about it, it is way over pressure from what I can tell
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#154017
12/27/2014 2:46 AM
|
Joined: Dec 2003
Posts: 5,057
Gary
Distinguished Master
|
Distinguished Master
Joined: Dec 2003
Posts: 5,057 |
It may be too hot in your gun and I've had some issues with Magtech in the past too. You might check the case length to see if it's in spec. That's the fired cases...
Last edited by Gary; 12/27/2014 2:47 AM.
You can't wait any longer. Join the NRA and start writing your Congressmen and Senators.
|
|
|
Re: .454 Mag Tech
[Re: Gary]
#154026
12/27/2014 4:10 PM
|
Joined: Dec 2007
Posts: 3,359
SChunter
Shooting Expert
|
Shooting Expert
Joined: Dec 2007
Posts: 3,359 |
Good news Ryan! Let us know what Magtech says in response
|
|
|
Re: .454 Mag Tech
[Re: SChunter]
#154028
12/27/2014 5:38 PM
|
Joined: Oct 2009
Posts: 2,556
junebug
Gun Slinger
|
Gun Slinger
Joined: Oct 2009
Posts: 2,556 |
We are constantly reminded that all guns are different and what works in one is not good for all. It will be interesting to see what Magtech has to say on the matter. I had trouble with some Hornady 6.5 Caricano ammo being too hot and they sent me two boxes of non Hornady ammo for my trouble. That kind of service was much appreciated by me.
junebug
|
|
|
Re: .454 Mag Tech
[Re: junebug]
#154045
12/28/2014 1:38 AM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
I'm going to call them Monday and tell them everything so we'll see just what they say, I've got 8 boxes of the stuff all with the same lot number and I'm not going to fire anymore of it through my gun so I hope I can ship it back to them and trade it out with some from another lot. I've shot quite alot of Magtech in my .44 and my Redhawk .454 and never had any kind of trouble with there products so I think I just got a bad lot
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#154050
12/28/2014 1:53 AM
|
Joined: Oct 2009
Posts: 2,556
junebug
Gun Slinger
|
Gun Slinger
Joined: Oct 2009
Posts: 2,556 |
Hopefully they will stand behind there product and make it right as they should.
junebug
|
|
|
Re: .454 Mag Tech
[Re: junebug]
#154171
12/30/2014 2:17 AM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
Called Magtech the other day and left a message with there "tech" support and heard nothing so I called again this morning and talked to an operator and she said she would relay the message and I still haven't heard a word
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#155000
01/16/2015 9:59 PM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
well got the ammo shipped back to Magtech the other day, said they would get back to me
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#156144
02/10/2015 10:12 PM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
well it took awhile but they refunded my money on the ammo so I guess I can't cuss them!!
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#156146
02/10/2015 11:55 PM
|
Joined: Oct 2009
Posts: 2,556
junebug
Gun Slinger
|
Gun Slinger
Joined: Oct 2009
Posts: 2,556 |
Its good to see they made it right by you. Any company can have a bad product get out ,the good ones stand behind there products and make things right.
junebug
|
|
|
Re: .454 Mag Tech
[Re: Ryan 500L]
#156176
02/11/2015 6:04 PM
|
Joined: Jan 2004
Posts: 4,155
Gregg Richter
Distinguished Expert
|
Distinguished Expert
Joined: Jan 2004
Posts: 4,155 |
well it took awhile but they refunded my money on the ammo so I guess I can't cuss them!! Thanks for the update.
|
|
|
Re: .454 Mag Tech
[Re: Gregg Richter]
#156200
02/12/2015 2:17 AM
|
Joined: Nov 2012
Posts: 161
Ryan 500L
OP
member
|
OP
member
Joined: Nov 2012
Posts: 161 |
I don't know if they will actually break the ammo down to see what the problem was or not, I think the place I sent the ammo back to was in Minnesota and it's actually loaded in Brazil I think so who knows? I would kinda like to know what they found
|
|
|
|
0 registered members (),
49
guests, and 4
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|