Originally Posted By: s4s4u
Remember, if you are doing it to increase barrel length for legal reasons, it must be permanently installed.


We can take care of that
\:\)
Just get the tig out and run a quarter in bead
;\)
just kidding, I'll have to check again and see what the requirements are for permanent. I know pinning is one way but I also believe if I just put silver solder on the threads and solder it that will meet their criteria also.

I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist