initial shake down
#47980
02/27/2009 1:19 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
OP
Shootist
|
OP
Shootist
Joined: Jan 2005
Posts: 7,655 |
The 44spcl conversion and the 500 Linebaugh are both mechanically finished so the only thing left is the finish work, final polishing, grips and bluing but they both shoot. I went out today but the weather isn't what you'd want to spend much time shooting in so I didn't do any accuracy testing yet but just functional testing. The 3 screw 44 is a sweetheart to shoot, I only have 240gr bullets on hand so I loaded up a few and ran 15 through the gun without a hitch. The 500 has a 8.5" barrel so it's a little hefty and it's a hammer to shoot. I loaded up some 435gr CP hardcast but I forgot my wrist brace so between that and the fact that I haven't modified the grip frame yet I only ran 5 through it. Pretty bad I have to have both wrists fused and I'm building cannons but both guns worked flawlessly and I learned alot and the next one will be easier and I will be able to avoid some mistakes made this time around but I still have all my fingers and toes so I guess that alone makes the completion of my first cartridge conversions a success.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: initial shake down
[Re: wapitirod]
#47984
02/27/2009 2:01 AM
|
Joined: Mar 2008
Posts: 300
rickiesrevenge
enthusiast
|
enthusiast
Joined: Mar 2008
Posts: 300 |
Cool. Maybe someday I will have the tools and know how to do that. If won't be until after I leave the service and don't have to move all the time.
|
|
|
Re: initial shake down
[Re: rickiesrevenge]
#47995
02/27/2009 3:19 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
OP
Shootist
|
OP
Shootist
Joined: Jan 2005
Posts: 7,655 |
rickie, I've really enjoyed this and I hope when I'm good enough to make some money at it but unless you want to do it for a full or part time job or build yourself alot of guns it's not worth the expense. I was regulated by space so I went with smaller machinery but I can already see a need for a bigger lathe and mill, plus my old metal bandsaw is giving it up but I've spent enough so far to have bought 4 FA premier grade guns and I'm not done yet. But if you think you want to tackle it , it's not rocket science just read everything you can get your hands on and if you can talk to people that have experience that's even better. Unfortunately there are no good revolversmiths around me so I've had to learn everything from reading and trial and error. The only other thing I can tell you is it's very labor intensive and time consuming so if you don't love it you'll get burnt out fast. Good luck and thanks for serving.
Last edited by wapitirod; 02/27/2009 3:20 AM.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: initial shake down
[Re: wapitirod]
#47996
02/27/2009 3:26 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
OP
Shootist
|
OP
Shootist
Joined: Jan 2005
Posts: 7,655 |
one other project I almost forgot about that I test fired today was my Vaquero, I'm still using it for a test gun to play with so I pulled the barrel off and turned it down until the safety warning was gone and then I recut the crown and forcing cone to 11*. I won't know until the weather is better if I helped the accuracy or not.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: initial shake down
[Re: wapitirod]
#48002
02/27/2009 6:04 AM
|
Joined: Apr 2008
Posts: 1,757
cottonstalk
Pooh-Bah
|
Pooh-Bah
Joined: Apr 2008
Posts: 1,757 |
glad to hear you still have your body parts,hehe
"If you get to thinkin' you're a person of some influence,try orderin' someone else's dog around" unknown cowboy
|
|
|
Re: initial shake down
[Re: cottonstalk]
#48007
02/27/2009 6:26 AM
|
Joined: Jan 2004
Posts: 4,461
pab1
Distinguished Expert
|
Distinguished Expert
Joined: Jan 2004
Posts: 4,461 |
Experience is the best teacher, hunger good sauce. Osborne Russell Journal of a Trapper
|
|
|
Re: initial shake down
[Re: wapitirod]
#48027
02/27/2009 4:53 PM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
OP
Shootist
|
OP
Shootist
Joined: Jan 2005
Posts: 7,655 |
here is a pic of the two guns as they sit now
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: initial shake down
[Re: wapitirod]
#48044
02/27/2009 9:53 PM
|
Joined: Sep 2007
Posts: 276
H2OGUN
enthusiast
|
enthusiast
Joined: Sep 2007
Posts: 276 |
Those look great You should be very pleased with yourself
The Round That Strays Should Of Been Tossed Away
|
|
|
Re: initial shake down
[Re: H2OGUN]
#48058
02/28/2009 1:26 AM
|
Joined: Jan 2004
Posts: 1,222
bisleyfan44
veteran
|
veteran
Joined: Jan 2004
Posts: 1,222 |
That's awesome Rod. They both look great. You should be proud.
I'll gladly pay you Tuesday for a handgun today.
|
|
|
Re: initial shake down
[Re: bisleyfan44]
#48070
02/28/2009 4:19 AM
|
Joined: Feb 2008
Posts: 813
Jeremy
old hand
|
old hand
Joined: Feb 2008
Posts: 813 |
Pretty impressive Rod. I know that there is alot of time machining parts. That obviously is why you have invested in your tools. Stick in there ole boy, it will come back around!
Smith and Wesson 629 PC Magnum Hunter
|
|
|
Re: initial shake down
[Re: Jeremy]
#48074
02/28/2009 6:27 AM
|
Joined: Jan 2004
Posts: 4,461
pab1
Distinguished Expert
|
Distinguished Expert
Joined: Jan 2004
Posts: 4,461 |
Way to go, they both turned out great!
Experience is the best teacher, hunger good sauce. Osborne Russell Journal of a Trapper
|
|
|
Re: initial shake down
[Re: pab1]
#48076
02/28/2009 7:14 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
OP
Shootist
|
OP
Shootist
Joined: Jan 2005
Posts: 7,655 |
thanks for the compliments guys, I really appreciate it. I ordered 454 reamers today and some brass so I can get ready to start my next project which I'm still a little iffy on but I think I'm going to go ahead and rechamber my Vaquero to the Casull. I just need to make sure I've got enough meat on the frame before I open it up for the five shot cylinder.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: initial shake down
[Re: wapitirod]
#48082
02/28/2009 2:47 PM
|
Joined: Feb 2009
Posts: 189
Renster of N.H.
member
|
member
Joined: Feb 2009
Posts: 189 |
Rod, Ref; the Vaquero, did you make the 5 shot cyl or are you floating one in from another revolver?
Renster
"It's OK to be a sheep, as long as you appreciate the sheepdogs that make it possible"
|
|
|
Re: initial shake down
[Re: Renster of N.H.]
#48084
02/28/2009 3:02 PM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
OP
Shootist
|
OP
Shootist
Joined: Jan 2005
Posts: 7,655 |
it's a blank I can buy from Bowen, Brownells, or Midway and it comes with undersized cylinder and base pin holes. I have to shave the ends in the lathe to square it up and get it to the correct length, they start out at roughly 2" and I take it back to 1.800" and then depending on the fit I may have to install a end float bushing and then trim to get the cylinder to frame clearance I need. The next step is ream the base pin hole and install it in the frame and then I line bore the cylinder in the frame and then I chamber it.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: initial shake down
[Re: wapitirod]
#48087
02/28/2009 3:08 PM
|
Joined: Feb 2009
Posts: 189
Renster of N.H.
member
|
member
Joined: Feb 2009
Posts: 189 |
Rod,
End float bushing? I'm guessing on the front of the cyl? And by "float" does that mean it is NOT physically attached to the cyl?
"It's OK to be a sheep, as long as you appreciate the sheepdogs that make it possible"
|
|
|
Re: initial shake down
[Re: Renster of N.H.]
#48092
02/28/2009 3:55 PM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
OP
Shootist
|
OP
Shootist
Joined: Jan 2005
Posts: 7,655 |
yep it goes in the front, it's a press fit in the frame but the float comes from the fact that it "floats" against the frame.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: initial shake down
[Re: wapitirod]
#48432
03/04/2009 9:23 PM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
OP
Shootist
|
OP
Shootist
Joined: Jan 2005
Posts: 7,655 |
I was able to get out long enough today to finish sighting in the 500 @ 25yds. The gun is also complete now with the grip frame re shaped and the gun blued. I'll make some custom grips for it when I get extra motivated.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: initial shake down
[Re: wapitirod]
#48435
03/04/2009 9:49 PM
|
Joined: Apr 2005
Posts: 6,963
KRal
Shootist
|
Shootist
Joined: Apr 2005
Posts: 6,963 |
Sweet!!! Rod, I've tried to send you a PM a couple times but, it says your mailbox is full...go check your mail...LOL...when you get a chance drop me a PM and I'll reply...looks like she shoots good too!
It takes 43 muscles to frown and 17 to smile, but only 3 for proper trigger squeeze.
|
|
|
Re: initial shake down
[Re: KRal]
#48436
03/04/2009 9:54 PM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
OP
Shootist
|
OP
Shootist
Joined: Jan 2005
Posts: 7,655 |
I emptied it yesterday so it should be good to go.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: initial shake down
[Re: wapitirod]
#48452
03/05/2009 2:20 AM
|
Joined: Nov 2008
Posts: 194
DAHLTAILS
member
|
member
Joined: Nov 2008
Posts: 194 |
That is awsome! I would be pretty nervous to do what you are doing,but I would like to try it someday. Stuff like that has to be a labor of love.
44 MAG RUGER REDHAWK
|
|
|
Re: initial shake down
[Re: DAHLTAILS]
#48461
03/05/2009 3:16 AM
|
Joined: Aug 2008
Posts: 142
N.E.S.
member
|
member
Joined: Aug 2008
Posts: 142 |
|
|
|
Re: initial shake down
[Re: DAHLTAILS]
#48483
03/05/2009 6:13 AM
|
Joined: Jan 2004
Posts: 4,461
pab1
Distinguished Expert
|
Distinguished Expert
Joined: Jan 2004
Posts: 4,461 |
Looks great Rod! Good bear and elk medicine!
Experience is the best teacher, hunger good sauce. Osborne Russell Journal of a Trapper
|
|
|
|
0 registered members (),
62
guests, and 2
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|