using torque wrench for installing a scope

Print Thread

Re: using torque wrench for installing a scope [Re: ssphunter] #85024 03/19/2011 10:25 PM
Joined: Jun 2008 Posts: 976 Montana, USA doc with a glock old hand
doc with a glock old hand Joined: Jun 2008 Posts: 976 Montana, USA	ssp.., I use a torque driver ( fat handled screwdriver device ) set to 12-14 inch pounds with the appropriate bit. It works great and prevents damage to screws, rings, scopes. http://www.ohiopowertool.com/P-1626-wright-5-40-in-lbs-torque-screwdriver-2464.aspx Get a look! Doc

Entire Thread
Subject	Posted By	Posted
using torque wrench for installing a scope	ssphunter	03/19/2011 2:52 PM
Re: using torque wrench for installing a scope	tyler.woodard04	03/19/2011 3:26 PM
Re: using torque wrench for installing a scope	ssphunter	03/19/2011 3:41 PM
Re: using torque wrench for installing a scope	s4s4u	03/19/2011 4:46 PM
Re: using torque wrench for installing a scope	bfr4570	03/19/2011 4:53 PM
Re: using torque wrench for installing a scope	KYODE	03/19/2011 5:20 PM
Re: using torque wrench for installing a scope	Ernie	03/19/2011 5:51 PM
Re: using torque wrench for installing a scope	TCTex.	03/19/2011 9:53 PM
Re: using torque wrench for installing a scope	ssphunter	03/19/2011 10:17 PM
Re: using torque wrench for installing a scope	doc with a glock	03/19/2011 10:25 PM
Re: using torque wrench for installing a scope	Mike Harris	03/20/2011 2:39 AM
Re: using torque wrench for installing a scope	Ernie	03/20/2011 3:18 AM
Re: using torque wrench for installing a scope	cfish2	03/20/2011 4:30 AM
Re: using torque wrench for installing a scope	tyler.woodard04	03/20/2011 12:55 PM
Re: using torque wrench for installing a scope	geojanitor	03/20/2011 2:40 PM
Re: using torque wrench for installing a scope	wapitirod	03/22/2011 7:54 AM

Newest Members