Can't say anything good about the Lee priming system on their progressives but the little handheld is nice and enhances your QC on your brass.

The Lee Loadmaster is actually not that bad except for their priming station. I say RIP THAT THANG OUT! and prime off the press. The plastic priming station will drive you MAD!!! after just a Thousand rounds or so.

The carbide dies produce great ammo and the "factory crimp die" eliminated my chamber checks years ago.

I even like the powder charge disks. When you need to get a charge inbetween the volumina of two subsequent sizes, just whip out the dremel and adjust to the charge size you need. A new disk costs next to nothing.

The "bomber brand" clear goggles are cheap, weigh almost nothing and give good eye protection without distorting your view. IOW, buy some decent safety goggles that you can wear for hours at a time.

Oh, one more thing. Bought a Lee scale and considered it utter junk.

Forgive me for writing an opinion piece but I don't want you to waste money on junk.