Handgunhunt

Decided to join the 327 Federal club

Posted By: Chance Weldon

Decided to join the 327 Federal club - 04/05/2019 5:32 AM

Well, you guys did it. After rereading some of this season's posts about hunting with the 327, I decided I had to join the club. I've placed an order for an MGM Encore barrel. Can't wait for it to get here.
Posted By: racksmasher1

Re: Decided to join the 327 Federal club - 04/05/2019 10:09 AM

That will be a tackdriver, which barrel length did you order Chance?
Posted By: 45MAN

Re: Decided to join the 327 Federal club - 04/05/2019 11:18 AM

A 327 ENCORE, THAT MAY BE A FIRST, IT SHUD HAVE NEGLIGIBLE RECOIL AND INCREDIBLE BALLISTICS. IF YOU TOP END THE LOADS I AM NOT SURE THERE ARE PISTOL BULLETS OUT THERE UP TO THE TASK.
Posted By: sw282

Re: Decided to join the 327 Federal club - 04/05/2019 1:34 PM

l have seen 'CM NASH' perform magic with his Ruger SA 327...
Had a ''327'' Corvette once. lt could perform MAGIC too;-)
Posted By: Raptortrapper

Re: Decided to join the 327 Federal club - 04/05/2019 2:44 PM

I've been talking with Jack about building a 327 Federal out of a Ruger Super Blackhawk. He's looking in to it. Hope to have it done by this fall.
Posted By: Hards80

Re: Decided to join the 327 Federal club - 04/05/2019 3:36 PM

Welcome to the club! I have 2 and they have quickly become two of the most fired handguns in the rotation because of its outstanding versatility, with much of that being my wife shooting up all my 32 s&w long reloads.
Posted By: cmnash

Re: Decided to join the 327 Federal club - 04/05/2019 4:23 PM

What bore diameter will your barrel be? I know many 32/20 barrels have a .308 bore instead of .312 in order to utilize rifle bullets.
I wonder if the various .310 123 grain bullets intended for the 7.62?39 could be loaded successfully in a single shot .327 Federal. The shank behind the cannelure appears short enough to not interfere with case capacity.
Posted By: Chance Weldon

Re: Decided to join the 327 Federal club - 04/05/2019 7:50 PM

 Originally Posted By: racksmasher1
That will be a tackdriver, which barrel length did you order Chance?


I went with 12?. Figured that would allow me to squeeze about as much performance out of the cartridge as possible while not being overly cumbersome. I?m rather fond of my 221 Fireball in that length.



 Originally Posted By: cmnash
What bore diameter will your barrel be? I know many 32/20 barrels have a .308 bore instead of .312 in order to utilize rifle bullets.
I wonder if the various .310 123 grain bullets intended for the 7.62?39 could be loaded successfully in a single shot .327 Federal. The shank behind the cannelure appears short enough to not interfere with case capacity.


They had two options: .308? and .311?. I went with .311 so I could use 32 caliber pistol bullets.


 Originally Posted By: 45MAN
A 327 ENCORE, THAT MAY BE A FIRST, IT SHUD HAVE NEGLIGIBLE RECOIL AND INCREDIBLE BALLISTICS. IF YOU TOP END THE LOADS I AM NOT SURE THERE ARE PISTOL BULLETS OUT THERE UP TO THE TASK.


I?m planning on trying out the 100 grain XTP. I would have preferred a Barnes XPB, but there aren?t any in that caliber. I?ll do some testing and see if I think they?ll work.
Posted By: ratgunner

Re: Decided to join the 327 Federal club - 04/06/2019 3:49 PM

Great cartridge.
Posted By: cherokeetracker

Re: Decided to join the 327 Federal club - 04/09/2019 5:14 PM

Seems like a good cartridge, but I can do the same with a 357 and the shame is that there are not good bullets out there for this round.
I do not understand the niche for this caliber.
I do a lot with my 22 and will jump to the 357 next.
Posted By: Chance Weldon

Re: Decided to join the 327 Federal club - 04/10/2019 1:23 AM

It was designed as a self-defense round for revolvers. It's potent, but due to its size you can fit more rounds in a cylinder. True, the 357 is definitely a more capable round, especially in a hunting handgun, but that's not to say the 327 doesn't have a place among our hunting handguns. That's what I want to test - just how capable of a hunting round it is.
Posted By: KYODE

Re: Decided to join the 327 Federal club - 04/10/2019 2:16 AM

I would have thought .308 bore to be much more versatile????.....but i dont know.
Posted By: Chance Weldon

Re: Decided to join the 327 Federal club - 04/10/2019 2:24 AM

Yeah, probably, but I just really wanted the .311".
© 2024 Handgunhunt forums