Show your 44 Magnum

Here are my 44's. The Blackhawk is customized by Mag-Na-Port w/ holster by Mernickle and the Redhawk by Jack Huntington w/holster by Simply Rugged. The knife is by Javelina Knives.

OK some of you have seen my 44 Mag hardware and I have not figured out how to get photos in a post (Even with Gary's instructions) I am an engineer you know!!!

So here is a list---
1.Ruger Redhawk 4” Stainless
2.S&W 4” Model 29 Nickel Eagle Grips pined and recessed( it is on the Bragging Board)
3.S&W 8 3/8” Model 29 Hogue Grips pined and recessed( it is on the Bragging Board)
4.Ruger Super Black Hawk Bisley Hunter with 2X Trophy Wolf springs, Power Custom Pawl, Belt Mtn Pin
5.G2 Contender 12” w / 2X Weaver (Groups shot from this gun on the Bragging Board)

TCMAN Has Maudie now!!

The 7.5" Redhawk with the 2X Burris got traded for the 454 SRH

and the old 4" Model 29 (DAMFINO)

Been looking at a 4” Anaconda ( Wife says well see!!!)

Here is some help H20. I hope these are right?!?

[img] [/img]

Sorry it's not a great picture close up, but hey it's a working gun, and it's at work.

This is my 7.5" Ruger Super Blackhawk with a TSOB base, Burris 2X scope and SSK trigger job.

This is Maudie’s sister Matilda. No she is not the ugly stepsister. She is just big boned!

You will have to go to bragging rights to see mine, I can't get them posted here.
But it looks like any other Ruger Super Blackhawk Hunter .44mag

Heres my two. Old school and new!

Those German Grips are Awsome! I looked at some on the net. They are a little $$$ but seem to be very high quality. I think i may get some for my 4" Redhawk

Hey rupe is this yours?

Thanks Tigger, your the Man!

Super RH 7 1/2"

Sorry Pics are a couple years old. The gun is gone now but I still got the deer!! (Smile...)

Only 44 mag I still own is the Contender.


Dave

This is one I took last week.



Not a great pic, but this is a brown bear track near my black bear bait station. You can see the track goes from barrel tip to the crane swivel, & if you look just right you can make out a toe nail or two.
The mod 29 barrel is an 8&3/8", so the bear should be a solid 9 footer (normal estimater is take the track in inches, & add 1 for the squared bear size in feet. Some guides say add 2, but I go with the add 1 so I don't feel like I'm cheating!). We can't shoot brownies

First is a 29-3 with a 4" barrel, next is a 629, and last is a Super Blackhawk

Ruger 7.5" Redhawk with 2X Leupold
Hogue grips

Just a regular ole Super Blackhawk Hunter with a BSA red dot and Weigand scope rail. I have added a spring kit and a Belt Mtn base pin as well as the Hogue monogrip...I had an issue maintaining a good grip on the revolver with the stock laminate grips while wearing hunting gloves.

The bottom gun is a Dan Wesson 744V in it's 4" barrel config - I also have the 8" barrel



And these are always excellent - Ruger Bisley Hunter


Dave

This is baby:



This is my buddy:

Since my .45Colts start with the number 4 can I show them too???

This is my woods gun:



These are my CAS shootin' guns:



Another pair of CAS shootin' Irons:



This is my hunting friend:



I know, I do seem to be partial to the .45 Colt and big, big holes!!!

I like the barbed wire grips on the Bisley!! SHARP!!

Is that an Accusport limited run gun??

What in the world is Sarah Brady going to do with all of these 'Saturday Night Specials' after you hand them over to her.

Yes on the Accusport. The grips were done by my friend who does this type of work with a laser engraver. He does great work.

Hi men, this is mine



I'm hang myself trying to post this picture, I hope it is well visible.

Well I'm new here to the forum, but not handgunning. I recently picked up a nice find for me, not for some though. I just happen to be brousing my local pawn shop as I was looking for a Ruger SBH in SS without the square trigger guard and unfluted which is what I was looking for, and even though it has the fugly hogue grips it still shoots quite well. I did aquire thru another guy, a set of Ruger grips for it.

That's us!

Currently don't have a 44 revolver

I love the SRH. I have never regretted getting that one!

Kinda wish I had a 44 now. You guys make me jealous.

Lars

Not to change the topic, if I am. I've got a Super Blackhawk Hunter, w/Bisley grip. I'm thinking about a sling. Any comments. ideas, or photos? Also, single or dual point attachment? Thanks!
Revolver Man

That’s a nice piece. Post it on the Bragging Board and we’ll make sure it gets on the post! As for your question, slings can be useful if used and practiced with. As for how, there are others on this form that can give you better advice that I, cough, KYODE, cough. With that being said, just be careful not to burn your sling with the flame from the cylinder!

Cant post a pic right now, but my go to gun is a stock Super Blackhawk with iron sites.

Hey Doug and Lars, maybe its about time you get one. Got mine on gunbroker.com for $500 total brand spanking new (without the scope of course) and it shoots great... 2 1/4in groups at 100 yards on the bean bag.

That is what mine is shooting with 300 XTP over a max load over H110. SRH’s are shooters.

My RSBH 4 5/8 havnt found a load for it yet.

Does that mean you haven't shot it yet? Nice piece, I am sure you will enoy it.

Here is mine. Only one 44 revolver (also have Marlin 1894SS Lever gun) but it does have 2 barrels. The other one in the picture is a DW 357 with 3 barrels.



Here is the 44 with the custom muzzle brake built by my brother for it. It replaces the barrel nut.




Robb

You will have to go to the Bragging Board to see mine, I can't get it to post here. SBH Hunter.

God bless you Rupe!

I have been working on mine still!

Thanks TCman, now you can see mine. I have a 4X scope on it now.

I've got two as well (the blue one covered in other posts):


The stainless one is a S&W Performance Center m/629-5 Extreme Hunter w/12" barrel. I use it only for competition here at home, but it could be useful for hunts in Spain where they for unclear reasons have a minimum barrel length requirement of 12"....but at least they allow handgun hunting, which is more than what could be said of my country...

This is mine....



and I love it...

I was going to change the previous post I did and edit the picture, but won't

I posted earlier in this thread. Here is a picture with the 44 Rehawk that didn't make the last picture.

Just where it oughta be. Come on OCT 18th. Lead Slingin TIME!!!!!!!!

My Favorite Pistol!

Cowboy Boogie, That is a nice S&W! How's the ported barrel work for you? I thought about sending mine off to Magna-Port. I have the 629 in the 2 tone. Wasn't sure how much it helped.

Jeremy, it works well as a flashlight in low-light conditions! Seriously though, it came from the factory this way and I don't have another one to compare it with. I am working on changing that as we speak!

Cowboy, either way that is a sweet 629. Mine has a good bit of weight to it, recoil is not bad at all. It has more of a push to it than lift. If yours shoots like mine, I am sure it is a pleasure to shoot.

Very Sweet!
Vin

Jeremy, I had Magnaport do the 4 port job (rifle style) on my 8&3/8 mod 29 & it made a large difference with 320gr loads in the 1340fps range. I'd do it again in a heart beat.

Very beautiful 629 there.

Thanks Vance! I have been seriously considering it. I forgot about the MagnaPort until I saw Cowboy Boogies 629. Its still not even a big kick but with the ports, I bet it would be even better shootn!!

Variety pack.

Good lookin' trio, riggeruwz.

Here is my .44 mag. Virginian Dragoone.

[img] [/img]

I know they ain't .44s, but I thought something bigger (.45 Colts) would be a good substitute:





Well I did fudge a bit. Hee is another one of my .44 Mags:

I love the barb wire grips on your AcuSport bisley Raf.
VERY COOL!!

That was done with a laser machine. I have had quite a few pieces done and love them all. I had this running buck on my 1886 Winchester:

Who did the Laser Work???

I had heard that the guy that did the work went out of business. I checked his website and he is gone. Donlt know of anyone else that does this work. However, if you go to sassnet.com and check there site for a link. These guys are usually at major SASS shoots and my have a link. Good luck.