Show off your Encore pistol pics...............

Let see your Encore pistol pics!

416 Taylor - SSK Barrel

What kinda scope is that?

2X Loopy

This is a photo by Gary of one of his Encores. Four power Leupold.

This is an Encore you probably won't see very many of:
209X50 Muzzleloader



Along with a FA Model 83 in .454 wearing Bushnell 3200 Elite 2X6.

Ive seen a muzzleloader pistol before and I was just curious as to the recoil on it is. Looks like it would be fun but also tear your hand off too.

This pistol has no brake and with a 100 grain load of powder and a 295 gr. Black Belt the recoil will get your attention but not as bad as you think; not nearly as bad as some other centerfires with no brake. Not really a sharp snap like the CF's but more of a "push."

For instance: I shot the .270 Encore that I gave away on the HHI Antelope Hunt (with some factory ammo) and it was far worse.

Rite on< I shot a muzzleloader for the first time thinking it was a ball buster and it turned out to be a mild pussy cat

This is my Iowa setup.

Gregg Richter,
The 209x50 looks a lot like mine right to the painted forend

Heres mine with the 308 barrel and 2.5-7x tc scope. Also have a 223, 500sw, 45lc/410 barrel as well.

Lamina, how do you like the 500sw? I'm down to either the Encore 460 or 500 for my next purchase and wondering about recoil and effective distances. Recoil is not the major factor--I hunt with an S&W .460 PC and recoil is very manageable with the 200 gr. Hornady.

Here's mine with the 6.5x284 barrel, I'm getting a bipod for it when I get back.
It's 18" without the brake and it's wearing a Burris 3x12 w/Illum dot.
I also have pistol barrels in 45-70 and 308, rifle barrel in 243.

kingfisher--Of the barrels the 500sw is my favorite to shoot. It currently has a red dot on it and is repeatedly dead on at 100 yds. I currently shoot magtech 400gr sjsp. only downfall is the price of ammo-i have some 535gr keith style ranger rick cast to load up but no time yet. The barrel is a factory 15" ported barrel. Started with the stock rubber grip and the trigger guard would smash my knuckle so I got the pachamyr this year and it is awesome. I always grew up in shotgun deer country so I treat it as such=100-150yds gun. Some say its good out to 200-225 yds but I have yet to shoot at that. Only one deer with so far and I gut shot and killed with quick follow up shot with 44mag revolver so dont know how well does on deer--definitely a shocker when you show off the bullets and people are like whoa--you dont hunt with that do you? Recoil not much more than the 308 just sorta different.

Ammohouse,

where did you get those beautiful grip and forearm?

I pick her up Thursday!

Those are Georgia Jim grips and forends.
I love them and have them on all my setups.
I've got 2 sets that I'm going to trade/sell when I get back...or I could just but 2 more frames

Hope you make it home safely, thanks for your service and let me know when you decide to get rid of the two sets.

These are my go~to Encores.


218 BEE


243 Win


223 Rem

Are those rifle scopes you have on your toys?

Yes, rifle scopes on the BEE and 223 barrels. The recoil is minimal and I can have full field of view without face/scope contact. The 243 barrel has a Burris 3~12 handgun scope with BP reticle.

Thought they looked awfully long

My longest harvest with the PC is 175 yds. I'm trying to extend that distance to 250 yds but it has to be with a straight-wall bullit. That's why I'm looking at the Encores.

Here are some of mine.
.243 Winchester

.308 Winchester

.460 S/W

Here is my most recently aquired barrel-410/45lc. I cut down a rifle forend-it still needs some shaping on the end and only one rough coat finish as I want to get shooting squirrels with it. Also working on one in oak-but its my foirst attempt at a forend and the going is slow

I just got my hands on mine today and man is it a hand full and its gonna take some getting use to but Im a big boy I can tame that beast.

Love the squirrel gun! How long is that barrel and what kinda range are you getting?

Is that a rifle scope on your 243, SWEET!

It is a 10" barrell-unfortunately I have yet to shoot it. I got as deer season started so I will be getting back into squirrels next week

Just love gun porn, please keep it coming, Maybe I'll stick old MAD MAX on the run way for a peek

When you do let me know how she performed.

Let the world see MAD MAX!

I cant wait to put some rounds through mine. Im hoping its not too bad so the fun can begin,dressing her up!

Hey asquires2, Yea that is a 6x20 Simmons w/a 50 mm objective and it is deadly on prairy dogs out to 500 yrds.

Im taking it yo shoot it from a bench rest because Im thinking of the eye relief.

I put about 8 rounds through her lastnite and shes a keeper. The first 2 rounds was to get a fill for the trigger and recoil. The trigger isnt that bad but I like a lite trigger so she will get a 2.5 to 3lb trigger . The recoil surprised me , I thought she was gonna buck and jump out of my hand but to be honest it's better than my S&W 629. I'd like to have a rifle forend put on it, I like the long forend look but Im might end up with the Packy set so I can put a sling on her . Im wanting a 15" SS 243 barrel for her and I havent made up my mind as far as the scope goes. It will either be a Busrris or Nikon. I have never used a Burris so I dont know much about them on the other hand I love my Nikon rifle scopes. I bought a TC base for it to get a feel for the scope but Im not sure if Ill stick with it or not.Ill be joining the 3 ring circus ( scope rings)to add a little bling while that buck feels the sting.

Here is my prairy doggin set up. I just shoot right off the lid on the back of my truck. A heck of a shooting bench

i like a 2lb trigger myself. nooooope.....a .243 doesn't recoil much at all in a handgun. a 7mm-08 isn't bad either with 120gr bullets, but as you go up in bullet weight(154gr)you do notice the difference.
if you go with a factory rifle forend, or with a custom wood forend they usually have or can have a sling stud for sling attachment. the pachmayr grip would be best for easy sling attach at the rear.
i like the burris scope really well, but some do have issues with their eye relief....i don't.
for the 3 rings....go with a weaver base and leupold rifleman vertical split. super mount up imo, and doesn't cost that much.

you can make you some bags to rest off of from old jean legs cut to length, filled with a lightweight filler of your choice, and tied off on each end. use 3....two stacked in front and one under the rear/grip/wrists. again, works well and doesn't cost a lot to get started wringing out some good groups at 100yrds.

Nice rigs all.

Come on Ernie, don't be so humble, I'd love to see your X-P's!

We have a Gun show coming in the middle of the month and Im getting my grocery list together and hoping I can find what Im looking for . Im thinking the grips and scope shouldnt be a problem but the barrel mite b a nightmare. I CANT WAIT!!!!!!!!!!!!! Ive got a S&W 629 w/the mag port Im thinking about putting on the market to breath life into my baby, I havent made up my mind yet . Ive already got a rest Ill be using for her, a Shooters Ridge Tri Stance.

Here is my Stainless Encore 45/410 rig. It is death on soda cans at 20 yds with 3" #6's. Never shot 45 LC from it.
It will be in the turkey woods this spring with my.
Mike

Sweet !

Here's my Stainless Encore Pro Hunter in .338 Federal.
- Burris 2-7X scope
- Pachmayr decelerator magnum grip and forend
- BellmTC 2# trigger spring

...shown with two of it's first customers.

Whats the difference between the Magnum grip and the decelerator grips? What kinda range was those shots?

They are the Decelerator grips, but the ones designed for magnum guns rather than the regulr one... I believe the only difference is in how the forend attaches. If memory serves me, they use a shorter bolt to avoid the possibility of shearing off the longer bolt on the standard forend.

Range was ~40 to 50 yards on the piggies.

New guy here, thought I'd join in all this fun!


7mm-08 15 inch Encore
Forend and Grips by HighPlains Gunstocks
Gentry Quietbrake
Leupold 2.5x8x32
Coated in Green-T teflon by Birdson and Assoc.

I seen this one on another website and it took everything I had not to bid on it, she's purty.

Can someone tell me how much longer is the Packy pistol forend grip vs. the stock forend pistol grip?

I still haven't ruled out selling it.

Yeah at the time I had a S&W 629 on the chopping block but then it came down to another toy or money and I need the money worse.

Funny, a 629 is what I was looking for when I was trying to sell it. I ended up getting one without selling it! The endless circle of the gun trading economy.

Yeah I know , I loked at your thread a thousand times but I need a Encore that I want afraid to take to the woods.

This is a perfect one to take to the woods. The teflon finish is bullet proof and WILL NOT RUST

I found a .243 SS pro hunter.

WELCOME TOTCH!!!

asquires2, Real Nice Looking Rig.

I acquired a T/C SS Pro Hunter in .243 just like your beauty and gave it to my son Joe and his wife Barb for Christmas.

I mounted a scope on it and sighted it in first (of course.)

Rite on , I really havent shot mine yet , still waiting on a scope. Ill be going to the Gun Show this weekend. How did the Magnaport work out ? I thought about it but it doesnt really have that much recoil that I know of.

Hey Greg R. will you adopt me?I want to get Christmas gifts like that.L.O.L.