Wolff Trigger Return Springs

I'm getting ready to change out the factory springs to 30oz ones.On two single sixs, and a Bisley hunter. Wanted to know, from you guys who have replaced them.What type of trigger pull weight you have been averaging vs.factory.

with the 30 oz spring and no sear work you will get between 2 and 2.5# with a bit of creep. If your going to do any sear work step up to the 40oz and if you've done the sear work correctly you will end up with the same pull weight but no creep.

Thanks Wapitirod! I did one of the single sixs last night. And as you stated it fell just a few ounces over the two pound range. I'll have to order up some of those 40oz for the other two guns. Thanks