Posted By: REDHAWK1954
Trigger Job for my GP100 - 02/11/2016 11:48 AM
I have a GP100 and have mounted a 2x scope on it. The trigger is as it came from the factory. The trigger has no creep but a fairly heavy pull. All of my other hunting handguns have lighter trigger pulls.
What can I do without going to a gunsmith to lighten the trigger?
Posted By: s4s4u
Re: Trigger Job for my GP100 - 02/11/2016 1:50 PM
Wolff springs. I put the 10# hammer spring in my GeeP and it is pretty sweet.
Posted By: REDHAWK1954
Re: Trigger Job for my GP100 - 02/11/2016 2:09 PM
Is that something I can do myself?
Posted By: REDHAWK1954
Re: Trigger Job for my GP100 - 02/11/2016 7:02 PM
Great I just ordered the springs so I will give it a try when they get here.
Posted By: dhom
Re: Trigger Job for my GP100 - 02/12/2016 11:03 AM
I used the same 10lb trigger spring and a 12lb hammer spring. If I fire rapidly now and again the trigger doesn't reset. It helped to smooth up all the bearing surfaces. I used 1000 grit and then a crocus cloth slightly oiled. I don't shoot competition so most of my firing is single action.
Posted By: s4s4u
Re: Trigger Job for my GP100 - 02/13/2016 2:03 AM
I left the trigger spring stock in mine. I don't think it has a whole lot of bearing on trigger pull weight and I like a quick positive reset. I tried the 9# hammer spring but had some light strikes. Moved up to the 10#er and had flawless ignition and a sweet trigger so left it at that.
Posted By: REDHAWK1954
Re: Trigger Job for my GP100 - 02/13/2016 3:09 AM
That sounds like what I will try. If it works it is a simpler fix than changing both springs.