Posted By: Badubet
Bowen Nimrod in 500L- updated with new grip pics - 04/25/2018 2:37 PM
Here is my new Bowen Nimrod in 500L. Headed to the gripmaker at months end for some new shoes.
Posted By: 45MAN
Re: New Bowen Nimrod in 500L - 04/25/2018 6:44 PM
BADUBET: OOOPS, NO PICTURES, JUST THAT "IMG" BS. IS IT THE SAME GUN YOU HAD ON THE BRAGGING BOARD?
Posted By: Badubet
Re: New Bowen Nimrod in 500L - 04/25/2018 7:10 PM
Yea. Never can figure out the picture thing.
Posted By: 45MAN
Re: New Bowen Nimrod in 500L - 04/25/2018 7:26 PM
Yea. Never can figure out the picture thing.
BADUBET: PREVIEW YOUR POST AFTER YOU TYPE IN AN "IMG", IF NO PICTURE SHOWS UP THERE IS SOMETHING WRONG WITH THE "IMG" INFO.
Posted By: 45MAN
Re: New Bowen Nimrod in 500L - 04/25/2018 11:44 PM
BADUBET: DID YOU COMMISSION BOWEN TO BUILD IT? OR DID YOU BUY IT USED? OR WHAT? IF YOU HAD IT BUILT, HOW LONG DID IT TAKE AND WHY DID YOU CHOOSE THE 500 LINEBAUGH?
Posted By: Brenden
Re: New Bowen Nimrod in 500L - 04/26/2018 3:18 AM
Beautiful wheel gun. I hope to own a 500 Linebaugh one day.
Posted By: Gregg Richter
Re: New Bowen Nimrod in 500L - 04/26/2018 3:24 AM
Thanks KRal for posting the pic correctly.
That sure is a beautiful revolver.
Posted By: Badubet
Re: New Bowen Nimrod in 500L - 04/27/2018 12:11 AM
Thanks KRal for posting the picture.
45Man, I commissioned the build. Took about 3 months I guess from the time I got him a good donor gun. The first one I sent him had a few issues and he advised I start with a better example. So I lost a month getting it back and buying another and sending it to him.
I chose the 500L because I think the cost (fatigue) on the shooter is better long term for wear and tear. I have a heavy 45, 454 Casull, 475L, and a few 500L. I just didn?t have a SS 500L. John Linebaugh is building me a brass grip frame 500L currently and I?m deciding if I?m going to build a 500 Maximum. After that I?m done. I promise.
Posted By: Gregg Richter
Re: New Bowen Nimrod in 500L - 04/27/2018 5:06 AM
Bad, I think you nEED that MAXIMUM!
Posted By: Badubet
Re: New Bowen Nimrod in 500L - 04/27/2018 6:05 AM
Bad, I think you nEED that MAXIMUM!
My Wife would disagree. Ha
Posted By: Chance Weldon
Re: New Bowen Nimrod in 500L - 05/02/2018 1:43 AM
Takes a while to figure out the image tags.
Posted By: Badubet
Re: New Bowen Nimrod in 500L - 05/25/2018 1:39 AM
I just got the Nimrod back from Rob at Rowen Custom Grips. They are made from Turkish walnut.
Posted By: Badubet
Re: New Bowen Nimrod in 500L - 05/25/2018 5:57 AM
Bad, I think you nEED that MAXIMUM!
My need has been filled. Details to follow next week!
Posted By: cherokeetracker
Re: New Bowen Nimrod in 500L - 05/25/2018 1:54 PM
This sounds like a project is in order for that 500 Maximum. Yeehaw.
Rob does some fine work and one of the things I appreciate about him is the screws and escutcheons. Stainless on stainless.
hahaa I am a stickler in this area. I hate a brass escutcheon with any gun for that matter. But that is me.
Beautiful gun here. Turkish walnut also, on my 44 mag. I like the polished cylinder contrast.
Good luck on this next project.
Posted By: magman
Re: New Bowen Nimrod in 500L - 05/28/2018 12:21 PM
Beautiful grips. The rest of the gun ain't bad either.