What about a Ruger Blackhawk Convertible BN-36X?
#132544
05/20/2013 10:28 PM
|
Joined: Aug 2010
Posts: 147
Mike Hefner
OP
member
|
OP
member
Joined: Aug 2010
Posts: 147 |
Can I really change cylinders and shoot either 387 mag and/or 9mm? What barrel length would you suggest? Thanks, Mike
|
|
|
Re: What about a Ruger Blackhawk Convertible BN-36X?
[Re: Mike Hefner]
#132545
05/20/2013 10:51 PM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
yes and the barrel length is a matter of personal choice, in general the longer the barrel the more accurate.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: What about a Ruger Blackhawk Convertible BN-36X?
[Re: wapitirod]
#132546
05/20/2013 11:26 PM
|
Joined: Aug 2010
Posts: 147
Mike Hefner
OP
member
|
OP
member
Joined: Aug 2010
Posts: 147 |
|
|
|
Re: What about a Ruger Blackhawk Convertible BN-36X?
[Re: Mike Hefner]
#132548
05/20/2013 11:46 PM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: What about a Ruger Blackhawk Convertible BN-36X?
[Re: wapitirod]
#132560
05/21/2013 1:35 AM
|
Joined: Sep 2007
Posts: 7,331
TCTex.
Shootist
|
Shootist
Joined: Sep 2007
Posts: 7,331 |
The difference in the calibers is like. .003. The 357 being a 358 and the 9mm being a 355.
As for barrel length, I am going to give Rod a hard time and state Elmer's favorite length was 6in... LOL I really can't say much with the 17in Encores I have.
Democracy is two wolves and a lamb deciding what to have for dinner. Liberty is a well armed lamb Benjamin Franklin
|
|
|
Re: What about a Ruger Blackhawk Convertible BN-36X?
[Re: TCTex.]
#132606
05/22/2013 11:26 AM
|
Joined: Feb 2007
Posts: 1,725
500WE
Pooh-Bah
|
Pooh-Bah
Joined: Feb 2007
Posts: 1,725 |
They will most commonly be found with 6 1/2" barrels, IMO.
|
|
|
Re: What about a Ruger Blackhawk Convertible BN-36X?
[Re: wapitirod]
#132614
05/22/2013 5:50 PM
|
Joined: Feb 2013
Posts: 21
Ironsights
stranger
|
stranger
Joined: Feb 2013
Posts: 21 |
yes and the barrel length is a matter of personal choice, in general the longer the barrel the more accurate. With a longer barrel you can achieve greater velocity, site radius will be better than a shorter barrel. But just because the barrel is longer doesn't mean it is more accurate. The 9mm ammo you shoot out the gun shouldn't ever be as dead on as the 38special or 357 stuff you put out of it. Skeeter skelton wrote some work on the 357/9mm convertable mite want to look that up. He favored a 5inch barrel for his guns unless he had a specific job it mind for it.
Darlin it all depends which part of the country your from as to how stupid your are - The Bandit
|
|
|
Re: What about a Ruger Blackhawk Convertible BN-36X?
[Re: Ironsights]
#132616
05/22/2013 6:22 PM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
yes and the barrel length is a matter of personal choice, in general the longer the barrel the more accurate. With a longer barrel you can achieve greater velocity, site radius will be better than a shorter barrel. But just because the barrel is longer doesn't mean it is more accurate. The 9mm ammo you shoot out the gun shouldn't ever be as dead on as the 38special or 357 stuff you put out of it. Skeeter skelton wrote some work on the 357/9mm convertable mite want to look that up. He favored a 5inch barrel for his guns unless he had a specific job it mind for it. That's why I put in general although a longer barrel also gives the bullet a better chance to stabilize if your talking a two or three inch barrel vs a 5" or longer. Which is why they make fully rifled shotgun barrels instead of just using a rifled choke for slugs.
Last edited by wapitirod; 05/23/2013 8:37 PM.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: What about a Ruger Blackhawk Convertible BN-36X?
[Re: wapitirod]
#132631
05/23/2013 1:45 PM
|
Joined: Aug 2010
Posts: 147
Mike Hefner
OP
member
|
OP
member
Joined: Aug 2010
Posts: 147 |
I ordered it with a 6 1/2" barrel!
|
|
|
|
0 registered members (),
122
guests, and 0
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|