Previous Thread
Next Thread
Print Thread
Am I off? #136299 10/06/2013 4:32 AM
Joined: Jul 2010
Posts: 241
Grendel Offline OP
enthusiast
OP Offline
enthusiast
Joined: Jul 2010
Posts: 241
Ok, I have a problem & I don't. Since my wonderful wife (& cute)bought me my .44 Rem Mag Ruger Super Blackhawk Bisley Hunter for my 50th B-day I have jumped into reloading. I found this site, and have soaked up all sorts of info from you guys. I have looked @ books, talked to "Old Timers" & I'm kinda stuck. I ran my loads up to 10.9 magnum levels(IE.300 Gr. XTP on top of 26 grains of H110). I have backed it off to 22 grains of H110 300 grain XTP. This load is a wonder in my revolver! I git' 2-3 MOA, with a freakish 1 MOA once in a while. I have molds to cast 255 & 250 w/GC, but have no desire for casting right now. for the time being I see no need to fix what is not broke. Am I off?


"Aim small, miss small"
Re: Am I off? [Re: Grendel] #136300 10/06/2013 4:41 AM
Joined: Feb 2009
Posts: 830
rlb Offline
old hand
Offline
old hand
Joined: Feb 2009
Posts: 830
If it shoots, go with it. There's a lot of winter after hunting season to try different things.

Re: Am I off? [Re: rlb] #136301 10/06/2013 9:25 AM
Joined: Jan 2010
Posts: 566
mike.44 Offline
addict
Offline
addict
Joined: Jan 2010
Posts: 566
You are thinking correctly. I like the heavy cast too, but the xtp is a killer.

Re: Am I off? [Re: mike.44] #136303 10/06/2013 11:27 AM
Joined: Apr 2009
Posts: 3,625
Raptortrapper Offline
Shooting Master
Offline
Shooting Master
Joined: Apr 2009
Posts: 3,625
I shoot the 300gr xtp mag over 40.5gr H110 out of my 460, but everything else is switched over to "heavy for caliber" hard cast bullets from Cast Performance. I just can't bring myself to switch the 460 over to cast because it is picking off milk jugs at ridiculous ranges with the above mentioned load. Like ya said, I'f it aint broke, don't fix it.

When I started reloading, the guys on here guided me towards H110, and I love it. Its very stable, performs best at / near full house loads, and WAS available pretty easily around here. I am just now starting to use tightgroup in my 45 Colt and 500JRH, and although considerably slower, it seems to do the job very nicely! Think I'll save the H110 for the 460 loads only, and use tightgroup in everything else.

Not sure what my post has to do with your topic, but I just HAD to chime in! :-)


A lot of people are like a slinky: Not much fun till you push them down the stairs!

Lifetime Member of the NRA! Wish I'd a done it sooner.
Re: Am I off? [Re: Raptortrapper] #136305 10/06/2013 1:13 PM
Joined: Sep 2007
Posts: 7,331
TCTex. Offline
Shootist
Offline
Shootist
Joined: Sep 2007
Posts: 7,331
Nope, I went threw the same exact thing...

I have 46 10.9 Mag loads loaded up with 23gr H110.

I have now gotten into casting and having a blast. I am even casting hollow points now as well. LOL


It's just addicting.


Democracy is two wolves and a lamb deciding what to have for dinner. Liberty is a well armed lamb
Benjamin Franklin
Re: Am I off? [Re: TCTex.] #136317 10/06/2013 11:08 PM
Joined: Jul 2010
Posts: 241
Grendel Offline OP
enthusiast
OP Offline
enthusiast
Joined: Jul 2010
Posts: 241
I just didn't have to work at getting things working right. I have friends that seem to stuggle at getting the right loads, and I just happened into good loads in both .44 mag, & .357 for my model 28. I guess I feel a little guilty;)

Last edited by Grendel; 10/08/2013 1:00 AM.

"Aim small, miss small"
Re: Am I off? [Re: Grendel] #136325 10/07/2013 1:31 PM
Joined: Oct 2008
Posts: 750
bluecow Offline
old hand
Offline
old hand
Joined: Oct 2008
Posts: 750
thinking sound right to me. ive been shooting the same 240 cast load for 20 some years. it dose all i need it to do. but then i order the same meal at the same diner all the time so maybe you should take what i think with a grain of salt.


Everything before "but" is B.S.
Re: Am I off? [Re: bluecow] #136326 10/07/2013 2:39 PM
Joined: Oct 2012
Posts: 255
Scienceguy Offline
enthusiast
Offline
enthusiast
Joined: Oct 2012
Posts: 255
If it shoots good, have confidence and stick with it. Confidence in your shooting ability matters WAY more than jacketed vs cast or 150 fps! While its all fun to talk about and play with and there are some slight advantages here and there it really just take a decent .429 bullet at >700 fps and you have dead deer.

Re: Am I off? [Re: Scienceguy] #136338 10/08/2013 1:06 AM
Joined: Jul 2010
Posts: 241
Grendel Offline OP
enthusiast
OP Offline
enthusiast
Joined: Jul 2010
Posts: 241
Ya know I think your right about the confidence side of things. My son videoed me shooting my SBBH offhand @ 100 yards at a milk jug filled with water. I had an audience & took bets that I could hit the jug with the first shot. Only my son thought I could hit it on the first shot. Hit it with first 2 shots out of the cylinder. I'll try to figure out how to post that video.


"Aim small, miss small"
Re: Am I off? [Re: Grendel] #136347 10/08/2013 2:10 PM
Joined: Oct 2012
Posts: 255
Scienceguy Offline
enthusiast
Offline
enthusiast
Joined: Oct 2012
Posts: 255
Sir you are ready to go in my opinion. I'm not sure what your velocity is but I guess its >1250 fps should kill a deer like a hammer. It is obvious that you are proficient with the Ruger.

BTW I am a ridiculous tinkerer also, but the first time I shot my 45 colt with 13gr of HS6 I saw no need to tinker. I feel like I can kill anything in North America (well it can). It's accurate and recoils little. There are much more powerful loads but "can I shoot them as well?".

Re: Am I off? [Re: Scienceguy] #136513 10/12/2013 3:04 AM
Joined: Oct 2010
Posts: 102
Steve in PA Offline
member
Offline
member
Joined: Oct 2010
Posts: 102
Hodgdon lists 19.0 grains of H110 as the max load for 300 grain bullets. And you load 26.0 grains?

Personally, I use 20.0 grains of H110 with 300 grain XTP's out of my SRH.

Re: Am I off? [Re: Steve in PA] #136524 10/12/2013 3:45 PM
Joined: Jul 2010
Posts: 241
Grendel Offline OP
enthusiast
OP Offline
enthusiast
Joined: Jul 2010
Posts: 241
I checked my notes, and I was wrong. The load I used with 26 grains of H110 was a 240 gr. Magtech and Sarline .44 spc. brass. The bullet was seated to the second cannelure. Sorry, I didn't mean to mislead anyone.


"Aim small, miss small"
Re: Am I off? [Re: Grendel] #136529 10/12/2013 4:59 PM
Joined: Jan 2004
Posts: 9,608
s4s4u Offline
Shootist
Offline
Shootist
Joined: Jan 2004
Posts: 9,608
 Quote:
26 grains of H110 was a 240


That makes more sense. Same charge I use with the 45 Colt, but with a 250.


Rod, too.

Short cuts often lead to long recoveries.
Re: Am I off? [Re: s4s4u] #136542 10/13/2013 12:53 AM
Joined: Sep 2007
Posts: 7,331
TCTex. Offline
Shootist
Offline
Shootist
Joined: Sep 2007
Posts: 7,331
I have had fun with that exact same load... LOL

Duane


Democracy is two wolves and a lamb deciding what to have for dinner. Liberty is a well armed lamb
Benjamin Franklin
Re: Am I off? [Re: TCTex.] #136813 10/18/2013 2:27 AM
Joined: Jul 2010
Posts: 241
Grendel Offline OP
enthusiast
OP Offline
enthusiast
Joined: Jul 2010
Posts: 241
I bet you have! It seems I had some guidance with that load;) Thanks for sharing.


"Aim small, miss small"

Moderated by  Chance Weldon, Gary, Gregg Richter 

Newest Members
Redhawk41, Striker243, Sxviper, RobbieD, IRONMAN
9668 Registered Users
Top Posters(30 Days)
Who's Online Now
0 registered members (), 66 guests, and 3 spiders.
Key: Admin, Global Mod, Mod
Powered by UBB.threads™ PHP Forum Software 7.7.3