Hi. I have a new Ruger Silverhawk 45LC revolver with 5.5 inch barrel and bisley grip frame.
I am interested in heavy hardcast LBT type bullets.
Anyone have experience with these 360 grainers?
I'd use them mostly to punch holes in grizzly bears in self defence situations.
Any chance these bullets "ride" forward under recoil? Obviously a heavy crimp is necessary.

If you know of a supply of 320-335 grainers please share where I might find them. Laser-Cast only has the 360 in LBT form.

Try Beartooth Bullets, Cast Performance, and I would recommend Montana Bullet Works, but I've heard he closed the doors due to health issues.

I like the Cast Performance 335. I save the 360's for the 454.

340gr Penn for me.

350 Penn shoots pretty good too

That's one of my favorites too.

I too like the cast performance 335's better than the 360's. I have only used the 360's in a few guns, but in all cases they shoot extremely high, compared to any moderate loads. The 335's are bad enough ;^)

Craig

Thank you all for the responces. I figure I'll check into the 335 CP bullets. 360 does seem a bit high.

Once the bullet has passed all the way through the animal, it's work is done. There is such a thing as too much of a good thing some times ;-)

S4s4u... Yes I agree. The main reason I looked into the 360 grainers was simply because Laser-cast has them available, with free shipping to Alaska.
I did google hardcast bullets but most don't have bullets currently available. Back ordered it seems. Some won't ship to Alaska.

Well if it's all you can get, you gotta do what you gotta do. I've never had much use for that much weight but it sure will do the job.

Well... I ordered 355 grainers for my 480 Ruger from Lasercast. I also ordered 45 LC brass too. Spare money for the week is depleted.
I did send an e-mail to GrizzlyCartdridge regarding Cast Performance bullets and if they ship to Alaska. Leadhead said they can ship to Alaska, so this is an alternative.

I'm familiar w/the bullets & just about every Ruger. What's a Silverhawk?

My pet name for a stainless Blackhawk. I didn't coin the word, but like it. I refer to my target grey Super Redhawk as a Greyhawk.
It adds a bit of fun to the game. Didn't mean to confuse you.

CP even gets them to our little islands so the interior should not be a problem.Where you located and are you on the AOD forum?

I was jealous enough because you live in Alaska? Thought maybe it was a distributor variation I'd not seen or heard of. I have the same gun from an earlier run @ 12 years ago? It's my favorite. Most we worry about bears here is getting into our trash.

Another source for some good hardcast bullets in Double Tap ammo. I use their 360s (.45) and their 400 grain .500 bullets.

I live in Kotzebue. What is the AOD forum?

You shoot 360s in a 45 LC? If so, please share a bit about it.
I will look up Double Tap ammo. Thanks for sharing.

I do in both my .45 Bisley and my .454 Redhawk -- in both cases I shoot Double Tap's 360 grain WFNs.

RUSTYGUNN
The Laser Cast 3555grn shoot very well from my SuperRedhawk .480 with 26.5 to 27 gr of H110. and CCI primers. They shoot true to 180+ yds on a 10 inch plate, 6 hits for 6 shots at 26.5 gr H110.
I am not a fan of them on our deer though . I shot a doe this year at 80 yds, double lung [missed the heart]and she went 150 +yds. She bled heavy after 80 yds or so.The XTP's just work better for me on deer. Should be a wicked penetrator and bone breaker though, which I take is what you need.

Thanks Junebug... I'll keep my eye open for other bullets for the 480. I ordered the 355s because they are available. Other weights will eventually be bought.

May I trouble you for load info? All I have is H-110. Thanks.

I will PM it to you when I get home as I don't remember off the top of my head.

Thank you. No hurry thoough. I don't have 360s on hand. It would be more for future use. Education never hurts.

Here ya go RustyGunn
http://forums.outdoorsdirectory.com/showthread.php/139653-Alaska-hunting-45-Colt

AOD... Alaska OutDoors? I don't recall if I ever posted there. Maybe in my earlier days as a newb. I joined a lot of sites back then and only attend a few now.
Nice load stuff in that link. Thanks.

Otay... I ordered the TrueShot 360 grainers. They ship free to Alaska.
I did a lot of googling for hardcadt LBT bullets but they won't ship to Alaska via USPostal Service. Others didn't have any in stock.

Load info with this weight using H-110 is needed. Anyone know of any beginner loads? Max loads?
Thanks.

I do know heavy bullets shoot high... Any taller replacement front sights available for a Blackhawk model? Thank you.

The rear sight should handle the elevation.Do to cylinder lenght I think you will have to use the first crimp groove so not sure on grains of powder but probably not much more than 21gr of 296/H110

Thank you. I do appreciate the info.

From Hogdon...
18 grains of H-110 is a starting load.
21 is max load.
Thanks everyone.

Rusty -- PM sent.

Got it. Thank you. It all helps me go in the right direction.

The bullets came in. I figure I'll size a brass case and make a dummy round. These only have a single crimp groove. Very nice bullets.
I'll load a few test rounds soon.

Excellent! Please keep us posted.

Man, I can't imagine shooting 360's in my 45 Long Colt Ruger Blackhawk Hunter. Might rip the scope off. I use 300grn Beartooth cast w/gas check and they are plenty for anything here in OK or TX. I have shot through ene to end on hogs and deer with them.
I have gone to the XTP with H110. Shoots great out to 50 yds.
Let us know how those shoot.

Mike

I found a revised Lee Second edition reloading manual today that had loads for the 360 gr. bullet. lil gun 15.5 to 18 gr m.v. 984-1131 H110 18 to 21 gr m.v.1012-1151 H 4227 19.5 to 22 gr. m.v.1004-1167 It also has loads for the 325 gr. and 335 gr. bullet,hope these help.

Junebug... Thanks for the load info. I only have H-110.
I sized the brass and belled the mouths. The wife wanted to play Scrabble so I'll continue later.

Anyhoo... I won two out of three games tonight. We enjoy Scrabble.
I did create a dummy round and it fits the cylinder nicely. It will also help to adjust the bullet seater/crimp correctly. Hopefully I'll load some tester rounds tomortow.