I can't seem to find a load for .44mag, 240gr swc with H110. I was thinking its 24 or 25 grain max, but i'm not sure. I see that for jacketed rounds its 24gr, and i remember that W296 and H110 are just about identical, and W295 is 25gr for a 240gr swc, but it dont want to just go on guesses. Thanks

cyberhick

From my Lyman Pistol & Revolver Handbook;

240gr(linotype) mold #429667, 1.645" OAL, BC: 149, SD:186

*H110 starting load-22.5gr, velocity-1204 fps, CUP-31,800

*H110 Max Load-23.5gr, velocity-1266, CUP-35,700

Notes, * Designates the use of magnum primers.

Hope this helps.

I use 24gr of H110 behind my 240gr XTP MAGs and 240gr rem jhp, I've shot this load in my short and long barreled rugers and my 629, I've had excellent results with this load

I'm thinking i'll just go with 24gr as max for now. I might play with it later. My Lee reloading manual is lacking in some places.