460........The Mark of the Beast
#153230
12/10/2014 6:43 PM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
I have it. I came across a 14" used custom Match Grade Machine barrel in .460 S&W with: *Bull Forend *Grip *6-Hole Stainless Base *Fluting *Integral brake I couldn't pass that up. Not after playing with a friend's .460 S&W for sure! It just so happen that I had a Weaver 2-8x Pistol Scope sitting in my cave still in the box. How perfect is that! The grips are very comfortable and the forend has pillars for the screws. Unfortunately (and unknown until I received it) the forend has a hairline crack running from the front screw to the back and all the way through. I am going to attempt to glue it. If that doesn't work, maybe a cross bolt. Either way, it mounts fine and holds well enough as is and at the price I got it..............much less than a new barrel and scope base...........the stock set was basically free. The brake is nicely done, even though it's a 360 degree brake. Sucker should kick up some dust if I shoot it prone! That's for sure. I have all the needed accessories to load for it and plan to use 250gr Hornady XTP (non-Mag) bullets in it as well as 350gr WFN-GC Matt's Bullets. The 250's were for my .45 Colt Bisley, but it shoots the 300gr WFN-GC so well and shoots 230gr ACP ammo to the same POI. So, I'm gonna stick with those two bullets for the Colt. It will be interesting to see how the non-Mag XTPs do in the .460 S&W. They will either work perfectly...........or blow a serious hole in a deer or pig. We will see. I suspect they will do fine, if not a little excessive in the terminal performance arena. The 350gr WFN-GC bullets..................well...............I don't hunt anything that could possibly stop one of those, I don't suspect. But, it'll be fun to load in to the hilt and try. Ha!! Will be using Starline Brass and H110 for powder. The scope fit's perfectly with the MGM base and Warne rings. Nice and clear with perfect eye relief. I think it should hold up well. The Beast weighs 6 pounds 4 ounces!!! I don't think recoil will be that bad with the brake and weight. Hopefully, not famous last words. This is gonna be F-U-N......fun.
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153233
12/10/2014 8:25 PM
|
Joined: Dec 2008
Posts: 4,861
Franchise
Distinguished Expert
|
Distinguished Expert
Joined: Dec 2008
Posts: 4,861 |
That is one of the nicer looking Encores I have seen. Looks Sharp!
The Eyes are Useless, When The Mind Is Blind
|
|
|
Re: 460........The Mark of the Beast
[Re: Franchise]
#153237
12/10/2014 10:59 PM
|
Joined: Oct 2010
Posts: 738
98Redline
old hand
|
old hand
Joined: Oct 2010
Posts: 738 |
Agreed, really sharp pistol!
With that brake, that gun is going to be LOUD!
|
|
|
Re: 460........The Mark of the Beast
[Re: 98Redline]
#153241
12/11/2014 12:06 AM
|
Joined: May 2013
Posts: 1,596
racksmasher1
veteran
|
veteran
Joined: May 2013
Posts: 1,596 |
Going to have some fun with that
|
|
|
Re: 460........The Mark of the Beast
[Re: racksmasher1]
#153242
12/11/2014 12:10 AM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153249
12/11/2014 2:05 AM
|
Joined: Apr 2009
Posts: 3,625
Raptortrapper
Shooting Master
|
Shooting Master
Joined: Apr 2009
Posts: 3,625 |
That looks like the meaner sister to mine!! You're gonna love it!!!
Last edited by raptortrapper; 12/11/2014 2:07 AM.
A lot of people are like a slinky: Not much fun till you push them down the stairs!
Lifetime Member of the NRA! Wish I'd a done it sooner.
|
|
|
Re: 460........The Mark of the Beast
[Re: Raptortrapper]
#153251
12/11/2014 2:19 AM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153253
12/11/2014 2:49 AM
|
Joined: Apr 2009
Posts: 3,625
Raptortrapper
Shooting Master
|
Shooting Master
Joined: Apr 2009
Posts: 3,625 |
If yours shoots like mine, you're gonna love it!! My barrel was done by MGM as well. It will take out milk jugs at 200 yards with no problem. Mine loves the 300gr XTP's, but they aren't being made right now. Hopefully they will start again soon. That bullet with a bit of H110 shot a .532" group at 100 yards! Made me look FAR better than I really am!
Last edited by raptortrapper; 12/11/2014 2:50 AM.
A lot of people are like a slinky: Not much fun till you push them down the stairs!
Lifetime Member of the NRA! Wish I'd a done it sooner.
|
|
|
Re: 460........The Mark of the Beast
[Re: Raptortrapper]
#153258
12/11/2014 3:50 AM
|
Joined: Sep 2012
Posts: 526
sw282
addict
|
addict
Joined: Sep 2012
Posts: 526 |
|
|
|
Re: 460........The Mark of the Beast
[Re: Raptortrapper]
#153259
12/11/2014 3:50 AM
|
Joined: Sep 2012
Posts: 526
sw282
addict
|
addict
Joined: Sep 2012
Posts: 526 |
oops.. double post..Sorry guys.
282
Last edited by sw282; 12/11/2014 8:07 AM.
|
|
|
Re: 460........The Mark of the Beast
[Re: sw282]
#153262
12/11/2014 4:05 AM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
I'll stick with cast for everything 300+.
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153266
12/11/2014 12:16 PM
|
Joined: Sep 2013
Posts: 4,669
Chance Weldon
Distinguished Expert
|
Distinguished Expert
Joined: Sep 2013
Posts: 4,669 |
Zee, that's one beautiful gun right there.
Formerly TN Lone Wolf
"We are only as strong as we are united, as weak as we are divided." - J.K. Rowling
|
|
|
Re: 460........The Mark of the Beast
[Re: sw282]
#153268
12/11/2014 1:23 PM
|
Joined: Dec 2007
Posts: 3,359
SChunter
Shooting Expert
|
Shooting Expert
Joined: Dec 2007
Posts: 3,359 |
Zee - that's one sexy beast!
Don't worry, a little duct tape will hold that forend just fine
|
|
|
Re: 460........The Mark of the Beast
[Re: SChunter]
#153270
12/11/2014 1:52 PM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
Zee - that's one sexy beast!
Don't worry, a little duct tape will hold that forend just fine Ha!
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153276
12/11/2014 2:35 PM
|
Joined: Jan 2004
Posts: 5,512
Ernie
Distinguished Master
|
Distinguished Master
Joined: Jan 2004
Posts: 5,512 |
I see recoil fun in your future. Beautiful set-up.
Ernie the Un-Tactical
|
|
|
Re: 460........The Mark of the Beast
[Re: Ernie]
#153279
12/11/2014 2:57 PM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
I see recoil fun in your future. Beautiful set-up. Blasted rain!! I'm off and waiting to go to the range...........and it pouring!!
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153282
12/11/2014 3:37 PM
|
Joined: Nov 2010
Posts: 1,101
Bearbait in NM
old hand
|
old hand
Joined: Nov 2010
Posts: 1,101 |
Very nice. Your right, better put a dust mask in your range bag.
As to the stock split, my suggestion would be Brownell's accra glass/gel, and their black dye. Get some into the crack, and a smooth layer on the inside of the forearm, and don't worry about it oosing to the out a little. Once set, sand the stock with finer grits until the seam matches the rest. With the color of your laminate stock, I bet you might not even notice it.
I had a 375JDJ that was heck on sling swivels and stocks, with a Harris attached.
Craig
Northern born and Southern bred
|
|
|
Re: 460........The Mark of the Beast
[Re: Bearbait in NM]
#153283
12/11/2014 3:43 PM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
Thanks for the suggestions. I appreciate it. Gonna try and work on the forend this weekend.
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: sw282]
#153284
12/11/2014 3:46 PM
|
Joined: Apr 2009
Posts: 3,625
Raptortrapper
Shooting Master
|
Shooting Master
Joined: Apr 2009
Posts: 3,625 |
Thanks for the link! I've got plenty right now, but might not hurt to add a few more.
A lot of people are like a slinky: Not much fun till you push them down the stairs!
Lifetime Member of the NRA! Wish I'd a done it sooner.
|
|
|
Re: 460........The Mark of the Beast
[Re: Raptortrapper]
#153285
12/11/2014 4:14 PM
|
Joined: Aug 2014
Posts: 162
JBWhitehead
member
|
member
Joined: Aug 2014
Posts: 162 |
Beautiful setup!
Big recoil is right. My .460 made me want to chest bump, high five, touchdown dance at the first couple of trigger pulls.
Lead, push or get the heck out of the way!
|
|
|
Re: 460........The Mark of the Beast
[Re: JBWhitehead]
#153286
12/11/2014 4:42 PM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
The first time I shot my friend's .460 S&W.............I couldn't stop laughing afterwards. It was that awesome. Ha!
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153289
12/11/2014 8:41 PM
|
Joined: Apr 2009
Posts: 3,625
Raptortrapper
Shooting Master
|
Shooting Master
Joined: Apr 2009
Posts: 3,625 |
That's what I do when I touch off the 500JRH every time we take it out! The first few shots are ALWAYS a riot! It never gets old.
A lot of people are like a slinky: Not much fun till you push them down the stairs!
Lifetime Member of the NRA! Wish I'd a done it sooner.
|
|
|
Re: 460........The Mark of the Beast
[Re: Raptortrapper]
#153311
12/12/2014 1:09 AM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
This is what happens to a cracked forend after 5 rounds of .460 S&W.
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153312
12/12/2014 1:11 AM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
It's glued and clamped. Will see how it does when dried.
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153321
12/12/2014 3:03 AM
|
Joined: Apr 2009
Posts: 3,625
Raptortrapper
Shooting Master
|
Shooting Master
Joined: Apr 2009
Posts: 3,625 |
This is what happens to a cracked forend after 5 rounds of .460 S&W. That pretty much sucks!!!
A lot of people are like a slinky: Not much fun till you push them down the stairs!
Lifetime Member of the NRA! Wish I'd a done it sooner.
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153322
12/12/2014 3:03 AM
|
Joined: Jan 2004
Posts: 5,512
Ernie
Distinguished Master
|
Distinguished Master
Joined: Jan 2004
Posts: 5,512 |
I was afraid that was going to happen. I have broke some contender forends in the past with some heavy kickers.
Ernie the Un-Tactical
|
|
|
Re: 460........The Mark of the Beast
[Re: Ernie]
#153325
12/12/2014 3:24 AM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
I suspected it as well. Then, at the range, the crack grew with every shot.
The flip side, I didn't know how I was going to get the glue in the thin crack that pretty much encompassed half the forend. Once it split in two.........it was easier to glue.
;-)
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153326
12/12/2014 3:27 AM
|
Joined: Dec 2007
Posts: 3,359
SChunter
Shooting Expert
|
Shooting Expert
Joined: Dec 2007
Posts: 3,359 |
Zee - next time you'll heed the duct tape recommendation!
|
|
|
Re: 460........The Mark of the Beast
[Re: SChunter]
#153331
12/12/2014 4:13 AM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
Zee - next time you'll heed the duct tape recommendation! Shoulda listened. Dang'it!
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153332
12/12/2014 5:00 AM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
Eeeeets mo betta!
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153338
12/12/2014 11:53 AM
|
Joined: May 2013
Posts: 1,596
racksmasher1
veteran
|
veteran
Joined: May 2013
Posts: 1,596 |
|
|
|
Re: 460........The Mark of the Beast
[Re: racksmasher1]
#153340
12/12/2014 1:27 PM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
I used this.
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153350
12/12/2014 3:13 PM
|
Joined: Sep 2013
Posts: 4,669
Chance Weldon
Distinguished Expert
|
Distinguished Expert
Joined: Sep 2013
Posts: 4,669 |
Zee, do you have that hammer offset to the right?
Formerly TN Lone Wolf
"We are only as strong as we are united, as weak as we are divided." - J.K. Rowling
|
|
|
Re: 460........The Mark of the Beast
[Re: Chance Weldon]
#153351
12/12/2014 3:16 PM
|
Joined: Apr 2009
Posts: 3,625
Raptortrapper
Shooting Master
|
Shooting Master
Joined: Apr 2009
Posts: 3,625 |
Looks like a good fix! I used to do wood work, and the titebond stuff is stronger than the wood itself!
I bet it will work for you. Looks nice!
A lot of people are like a slinky: Not much fun till you push them down the stairs!
Lifetime Member of the NRA! Wish I'd a done it sooner.
|
|
|
Re: 460........The Mark of the Beast
[Re: Chance Weldon]
#153361
12/12/2014 5:14 PM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
Zee, do you have that hammer offset to the right? Yes. Though, I'm realizing now that I want to offset it to the left. I place my shooting hand on the gun and want to cock the hammer with my left, as with single actions. Gotta switch it.
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153365
12/12/2014 6:51 PM
|
Joined: Mar 2014
Posts: 3,006
Zee
OP
Shooting Expert
|
OP
Shooting Expert
Joined: Mar 2014
Posts: 3,006 |
Woohoo!!! It's holding like a champ!!! Went to the range late this morning to test the forend repair and the remaining two loads I had made up. Set the target at 50 yards and crossed my fingers. First three rounds (48.5 gr) went off without a hitch. Checking the forend between shots, there was no sign of a crack and all three grouped a little over 1/2" to boot. Recoil? yeah........it was more than the loads yesterday. With renewed vigor.......I stepped up to the plate with the 49.0gr loads......... I'm a happy camper. No further issues with the crack and it's shooting better than I expected. The primers aren't overly flattened and extraction is easy as pie. I could probably go higher with the powder, but I'm not going to push these non-mag bullets any faster. I think I will call it good enough for these bullets and move on to the 350gr cast bullets next. Recoil.............it's there. More so than my friends revolver with the 200gr. bullets. There is assuredly more FELT recoil in this gun. I think that has to do with the fact he has a rubber grip and mine is wood. Individual shots make you aware you just fired. Each shot in and of itself is not painful, but I can tell that a long session would wear your hand out. I fired 6 rounds today with no issues. 15-20 would probably be max without a break. Here is the recoil in slow motion. [IMG]http://i26.photobucket.com/albums/c106/lovinmycaitlynn/Shooting/460%20Range%20Report%201_zpsjamw9edy.mp4[/IMG]While I think the brake is an inefficient design compared to a side ported baffle................I'd hate to know what it would be like without one. So, crisis averted. All seems well in the stock world and accuracy is acceptable. Life is good. Hmmmmmmmmmm...........I have one round left. What should I do with it? Oh........I know!!! I'm gonna try and kill a deer with it this evening. :evilgrin:
"To Hell with efficiency, it's performance we want!" - Elmer Keith
|
|
|
Re: 460........The Mark of the Beast
[Re: Zee]
#153369
12/12/2014 8:10 PM
|
Joined: Jan 2004
Posts: 5,512
Ernie
Distinguished Master
|
Distinguished Master
Joined: Jan 2004
Posts: 5,512 |
Ernie the Un-Tactical
|
|
|
Re: 460........The Mark of the Beast
[Re: Ernie]
#153473
12/14/2014 4:34 AM
|
Joined: Jun 2010
Posts: 3,020
tradmark
Shooting Expert
|
Shooting Expert
Joined: Jun 2010
Posts: 3,020 |
cool gun. I like the color of that wood on it. looks like it's working well for ya!
|
|
|
|
0 registered members (),
74
guests, and 1
spider. |
Key:
Admin,
Global Mod,
Mod
|
|
|