|
Thoughts on .454 barrel length 6" or 7.5"
#207113
06/10/2020 8:24 PM
|
Joined: Feb 2019
Posts: 16
ivoryhunter
OP
stranger
|
OP
stranger
Joined: Feb 2019
Posts: 16 |
Considering my first Freedom Arms purchase, there are 2 available with the options I like, factory trigger job and black micarta grips. One has a 6" barrel and one a 7.5"
Currently shooting a SBH with 6.5" barrel and a .45 SBHH with the 7.5" I like them both.
I will use it for target as well as hunting. Although I am an avid traditional bowhunter and muzzleloader hunter have never hunted with a pistol not allowed in N.J. Nearing retirement and hope to give it a try probably starting with a Pa. preserve hunt.
Would appreciate any thoughts or preferences from you all.
Thanks, Ivoryhunter
Last edited by ivoryhunter; 06/10/2020 8:25 PM.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: ivoryhunter]
#207114
06/10/2020 9:16 PM
|
Joined: May 2012
Posts: 2,502
reflex264
Gun Slinger
|
Gun Slinger
Joined: May 2012
Posts: 2,502 |
I used to think 6.5" but the 454 has taught me that barrel length matters. 7.5" gets my vote.
"A quiet hit in the right place is better than a loud miss in the wrong place followed by 10 more shots on the run"
I was a handgun hunter, when handgun wasn't cool.....
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: reflex264]
#207115
06/10/2020 9:44 PM
|
Joined: Oct 2005
Posts: 523
Walkingthemup
addict
|
addict
Joined: Oct 2005
Posts: 523 |
I have been considering a similar thing. Looking at a .454 BFR in either a 6.5 or 7.5 barrel. Does anyone have info on how much velocity is lost going to the shorter barrel? Most load data is based on 9.5 barrel length and I know my current 7.5 is a lot slower than those figures. Ballistics by the Inch don't have data for the .454.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: Walkingthemup]
#207118
06/11/2020 4:43 AM
|
Joined: Dec 2018
Posts: 91
BIZZMO
journeyman
|
journeyman
Joined: Dec 2018
Posts: 91 |
you're looking at about 60-70fps difference between the two.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: BIZZMO]
#207119
06/11/2020 1:50 PM
|
Joined: Feb 2008
Posts: 2,434
H2OBUG
Pooh-Bah
|
Pooh-Bah
Joined: Feb 2008
Posts: 2,434 |
I never felt like the extra recoil of the 454 was worth the velocity adder over a hot loaded 45 Colt. Works out to be an extra 300 FPS or so with the 250 gr bullet. Felt recoil difference is noticeable.
If it jams force it! If it breaks it needed replacing anyway.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: H2OBUG]
#207120
06/11/2020 9:17 PM
|
Joined: Dec 2005
Posts: 1,048
wvhitman
old hand
|
old hand
Joined: Dec 2005
Posts: 1,048 |
I have a Taurus Raging Bull .454 5" a FA .454 7.5" and a Ruger SuperBlackhawk .454 7.5". All are ported. The 5" has a good bit more "flip" in it. I prefer the 7.5s. The longer barrel makes the gun more balanced to me and makes off hand shots easier.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: wvhitman]
#207121
06/12/2020 1:37 AM
|
Joined: Jun 2008
Posts: 765
wheelguns
old hand
|
old hand
Joined: Jun 2008
Posts: 765 |
It really comes down to personal preference. The difference in velocity is not going to be enough to worry about. I have two FA's in 454, one 6" and one 10" love them both, and don't know if I could choose between them.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: wheelguns]
#207123
06/12/2020 5:22 AM
|
Joined: Aug 2012
Posts: 109
Jeffrey G.
member
|
member
Joined: Aug 2012
Posts: 109 |
If you get a BFR 454 I would suggest 6.5 inch as they measure from the front of the frame. So 6.5 turns out closer to 7 inches in reality. And the BFR Bisley grip frame and white or black micarta grip is sharp looking. I encourage the BFR over the Freedom Arms. You can get more by designing your custom feature BFR on their website and they will make it just as you specify.
Last edited by Jeffrey G.; 06/20/2020 2:07 AM.
Jeffrey G. Locke
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: Jeffrey G.]
#207126
06/12/2020 5:12 PM
|
Joined: Jan 2004
Posts: 9,715
jamesfromjersey
Shootist
|
Shootist
Joined: Jan 2004
Posts: 9,715 |
Dick Casull once told me he designed his 454 around a 7 1.2" barrel...
Life member-NRA-SCI Member-HHI #2900-HHASA #067 Colt-Ruger-Freedom Arms-and S&W Collector Assoc.s "I have more guns then I need but not as many as I want" "Handgun hunters HAVE to be good"
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: jamesfromjersey]
#207143
06/14/2020 11:15 AM
|
Joined: Oct 2008
Posts: 750
bluecow
old hand
|
old hand
Joined: Oct 2008
Posts: 750 |
jamesfromjersey, JMHO that would be enough info for me to decide, on the other hand I'm willing to admit that the 454 is just too much for me.
Everything before "but" is B.S.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: bluecow]
#207145
06/14/2020 12:19 PM
|
Joined: Feb 2019
Posts: 16
ivoryhunter
OP
stranger
|
OP
stranger
Joined: Feb 2019
Posts: 16 |
Thanks for everyone weighing in on this. Will defer to Dick Casull and go with 7.5 barrel. Taking another look at BFR'S which are kind of tempting due to big price difference, hard to decide business has been good but this virus has me concerned with the future. Thanks again, Ivoryhunter
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: bluecow]
#207151
06/14/2020 5:05 PM
|
Joined: Apr 2011
Posts: 417
Seminole Wind
addict
|
addict
Joined: Apr 2011
Posts: 417 |
I'm willing to admit that the 454 is just too much for me. Many don't like a scoped revolver, but for me the extra weight of the scope makes a 454 much more fun to shoot. I actually enjoy shooting my scoped 454 FA and BFR. The amount of torque has gone from violent to merely awesome. You can check out my scoped BFR on the Bragging Board.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: Seminole Wind]
#207153
06/14/2020 6:11 PM
|
Joined: Feb 2019
Posts: 16
ivoryhunter
OP
stranger
|
OP
stranger
Joined: Feb 2019
Posts: 16 |
Seminole Wind that is a nice looking pistol, what is the grip on it, I don't see anything like that on stock BFRS currently for sale.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: ivoryhunter]
#207154
06/14/2020 6:36 PM
|
Joined: Apr 2011
Posts: 417
Seminole Wind
addict
|
addict
Joined: Apr 2011
Posts: 417 |
Ivoryhunter, thanks. The grips are custom from Chad Robinette at Chigs Grips. They are made of Aspen, which is a soft wood, but they have held up under hunting conditions without a scratch.
|
|
|
Re: Thoughts on .454 barrel length 6" or 7.5"
[Re: bluecow]
#207165
06/16/2020 6:27 PM
|
Joined: Jan 2004
Posts: 9,715
jamesfromjersey
Shootist
|
Shootist
Joined: Jan 2004
Posts: 9,715 |
jamesfromjersey, JMHO that would be enough info for me to decide, on the other hand I'm willing to admit that the 454 is just too much for me. BC, That`s as honest a reply I`ve seen in a while....
Life member-NRA-SCI Member-HHI #2900-HHASA #067 Colt-Ruger-Freedom Arms-and S&W Collector Assoc.s "I have more guns then I need but not as many as I want" "Handgun hunters HAVE to be good"
|
|
|
|
0 registered members (),
104
guests, and 1
spider. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|