Previous Thread
Next Thread
Print Thread
Will barrel porting damage scope? #17996 01/01/2007 4:45 PM
Joined: Jan 2007
Posts: 2
PatrickStickler Offline OP
stranger
OP Offline
stranger
Joined: Jan 2007
Posts: 2
Hi,

I'm planning on mounting a scope on my Taurus Tracker 627, but it has a ported barrel and am wondering if the porting will damage a scope if mounted either over or too close to the porting.

???

Thanks,

Patrick

Re: Will barrel porting damage scope? [Re: PatrickStickler] #17997 01/01/2007 5:06 PM
Joined: Jan 2004
Posts: 9,608
s4s4u Offline
Shootist
Offline
Shootist
Joined: Jan 2004
Posts: 9,608
If the scope extends over/beyond the ports you will get a li'l sumtin' on it, depending on the angle of the vents. If it is near/just shy of the ports you may get some hot stuff on the lens that could cause significant damage, depending on how close it is, and again, the angle of the vents. If you got the rings, get a 1" piece of dowel rod, paint it white, fix it in the rings where the scope will sit and shoot a few cylinders. The paint will tell the tale. FWIW, Rod.


Rod, too.

Short cuts often lead to long recoveries.
Re: Will barrel porting damage scope? [Re: s4s4u] #17998 01/02/2007 1:08 AM
Joined: Jan 2004
Posts: 4,375
Dan B. Offline
Distinguished Expert
Offline
Distinguished Expert
Joined: Jan 2004
Posts: 4,375
Quote:

If the scope extends over/beyond the ports you will get a li'l sumtin' on it, depending on the angle of the vents. If it is near/just shy of the ports you may get some hot stuff on the lens that could cause significant damage, depending on how close it is, and again, the angle of the vents. If you got the rings, get a 1" piece of dowel rod, paint it white, fix it in the rings where the scope will sit and shoot a few cylinders. The paint will tell the tale. FWIW, Rod.




Great idea!!

Re: Will barrel porting damage scope? [Re: s4s4u] #17999 01/02/2007 8:08 PM
Joined: Jan 2007
Posts: 2
PatrickStickler Offline OP
stranger
OP Offline
stranger
Joined: Jan 2007
Posts: 2
Thanks. I'll give it a try.

Re: Will barrel porting damage scope? [Re: PatrickStickler] #18000 01/11/2007 11:17 PM
Joined: Jan 2007
Posts: 34
Carolina Mtn Man Offline
newbie
Offline
newbie
Joined: Jan 2007
Posts: 34
I've just bought the S&W 460 XVR with the large ported end. I was thinking of putting a leupold VX-III 2.5-8x32 scope on it. After reading your posts, I was wondering if anyone had any experience with this combination and any suggestions on placement of the scope to prevent problems. Thanks


May the Sun be at your back, the Wind in your face, and the Trophy in your Crosshairs!
Re: Will barrel porting damage scope? [Re: Carolina Mtn Man] #18001 01/12/2007 12:00 AM
Joined: Jan 2004
Posts: 91
hangunnr Offline
journeyman
Offline
journeyman
Joined: Jan 2004
Posts: 91
Quote:

I've just bought the S&W 460 XVR ..... ..... I was wondering if anyone had any experience with this combination and any suggestions on placement of the scope to prevent problems. Thanks




I have a XVR with a Burris 2-7 on top and have had no problems with scope damage. The scope sits far enough back to be out of danger.



hangunnr

Re: Will barrel porting damage scope? [Re: hangunnr] #18002 01/12/2007 12:29 AM
Joined: Jan 2007
Posts: 34
Carolina Mtn Man Offline
newbie
Offline
newbie
Joined: Jan 2007
Posts: 34
Thanks for the info. It looks like it should work fine. Do you like your Burris. Is it a 28mm? How is its light gathering ability. Do you know how it compares with the Leupold? I feel the major drawback to handgun scopes is their light gathering ability. A few extra minutes at dusk can be the difference between the spike and the monster.


May the Sun be at your back, the Wind in your face, and the Trophy in your Crosshairs!
Re: Will barrel porting damage scope? [Re: Carolina Mtn Man] #18003 01/12/2007 1:23 AM
Joined: Jun 2005
Posts: 264
hntrjohn Offline
enthusiast
Offline
enthusiast
Joined: Jun 2005
Posts: 264
I had my 44mag Hunter ported by magnaport and have a 2x leupold on it and have had no problems at all regarding damage to the scope. Had a 2.5x8 leupold on my performance 500 and also no problems. You should be fine--go shoot and have fun.

Re: Will barrel porting damage scope? [Re: hntrjohn] #18004 01/12/2007 1:45 AM
Joined: Jan 2007
Posts: 34
Carolina Mtn Man Offline
newbie
Offline
newbie
Joined: Jan 2007
Posts: 34
Thanks for the info. I think I will stay with the Leupold. I've had good results from them in the past.


May the Sun be at your back, the Wind in your face, and the Trophy in your Crosshairs!

Moderated by  Chance Weldon, Gary, Gregg Richter 

Newest Members
Redhawk41, Striker243, Sxviper, RobbieD, IRONMAN
9668 Registered Users
Top Posters(30 Days)
karl 1
Who's Online Now
0 registered members (), 34 guests, and 3 spiders.
Key: Admin, Global Mod, Mod
Powered by UBB.threads™ PHP Forum Software 7.7.3