Previous Thread
Next Thread
Print Thread
Help with new contender barel #42753 12/22/2008 3:16 AM
Joined: Aug 2008
Posts: 142
N.E.S. Offline OP
member
OP Offline
member
Joined: Aug 2008
Posts: 142
Going to get a 44 mag barrel for my condender, what length do you think is best?
Will be deer hunting with it with factory ammo
THANKS
N.E.S.

Re: Help with new contender barel [Re: N.E.S.] #42755 12/22/2008 3:25 AM
Joined: Jan 2004
Posts: 4,704
Tigger Offline
Distinguished Expert
Offline
Distinguished Expert
Joined: Jan 2004
Posts: 4,704
12"


NRA Life Member



** NEVER! Moon a Werewolf!!**
Re: Help with new contender barel [Re: Tigger] #42756 12/22/2008 3:36 AM
Joined: Jul 2008
Posts: 105
Carpe Diem Offline
member
Offline
member
Joined: Jul 2008
Posts: 105
It won't matter much as far as velocity is concerned, the velocity difference between 10" and 14" is usually around 100 fps according to Lyman data. So 10" versus 12" is only 50 fps, which is a meaningless amount. Blast will be greater with a 10", but a 12" holster is bigger. I'd go with the 10" but would take a 12".


.


Based on total trigger pull weight, my trigger finger has lifted well over 200 tons....
Re: Help with new contender barel [Re: Carpe Diem] #42760 12/22/2008 4:01 AM
Joined: Jan 2005
Posts: 7,655
wapitirod Offline
Shootist
Offline
Shootist
Joined: Jan 2005
Posts: 7,655
I'd probably go with the 10"


I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist


Re: Help with new contender barel [Re: wapitirod] #42762 12/22/2008 4:21 AM
Joined: Jan 2008
Posts: 454
lhunter03 Offline
addict
Offline
addict
Joined: Jan 2008
Posts: 454
My buddie has a super 14, and the recoil is brutal. Take the 12 incher.

Lars


Lars

.357 maxi, .375 win, 30-30 ackley, .450 marlin, and anything else that goes boom!!!
Re: Help with new contender barel [Re: lhunter03] #42767 12/22/2008 9:28 AM
Joined: May 2008
Posts: 425
pter1020k Offline
addict
Offline
addict
Joined: May 2008
Posts: 425
was a used 10 for sale on this sight for 150 could still be available


Genesis chapter 1 verse 26

When shooting a single shot their are no warning shots.

Keith
Re: Help with new contender barel [Re: pter1020k] #42769 12/22/2008 11:35 AM
Joined: Mar 2008
Posts: 402
hunlee Offline
addict
Offline
addict
Joined: Mar 2008
Posts: 402
Hi there Hunlee hear!!!!!Hunlee is one that like super 14 incher barrle over shorter barrle!!!!!!!Hunlee allso like 15 an longer!!!!!!Hunlee is not a fan of shorter barrel on contender!!!!!Hunlee once have 12 incher in severial calliber butt then got one in 14!!!!!!Desision was made an 12 incher barrle were all sold off!!!!!!Hunlee will never have short Contender barrel agin!!!!!!

hunlee


Hunlee is friend to all,,,Is a lover not a fighter and has fathered many children!!!!
Re: Help with new contender barel [Re: hunlee] #42771 12/22/2008 12:19 PM
Joined: Jan 2004
Posts: 4,375
Dan B. Offline
Distinguished Expert
Offline
Distinguished Expert
Joined: Jan 2004
Posts: 4,375
NES...I have both and really have no preference between them. th the big .44 cal bore, the 14" actually balances better for me than the short 10" tube.


Exodus 20:5-11
Matthew 5:18
Revelation 22:14

ISPBS--Expert Level

Please don't use e-mail, contact me w/ PM.
Re: Help with new contender barel [Re: Dan B.] #42774 12/22/2008 12:57 PM
Joined: Feb 2008
Posts: 2,434
H2OBUG Offline
Pooh-Bah
Offline
Pooh-Bah
Joined: Feb 2008
Posts: 2,434
I like the 12" best


If it jams force it! If it breaks it needed replacing anyway.
Re: Help with new contender barel [Re: H2OBUG] #42775 12/22/2008 1:29 PM
Joined: Feb 2007
Posts: 1,725
500WE Offline
Pooh-Bah
Offline
Pooh-Bah
Joined: Feb 2007
Posts: 1,725
For the straight wall handgun cartridges, I prefer the 10". For bottlenecks, I prefer 14".

Re: Help with new contender barel [Re: 500WE] #42776 12/22/2008 1:32 PM
Joined: Jan 2004
Posts: 4,461
pab1 Offline
Distinguished Expert
Offline
Distinguished Expert
Joined: Jan 2004
Posts: 4,461
I like 10" barrels. A frame with a 10" barrel is around the same size as a 7.5" revolver.


Experience is the best teacher, hunger good sauce.
Osborne Russell Journal of a Trapper


Re: Help with new contender barel [Re: pab1] #42780 12/22/2008 1:41 PM
Joined: Jan 2004
Posts: 542
Rick Offline
addict
Offline
addict
Joined: Jan 2004
Posts: 542
I prefer the 14". I have a 10" and wish I would have bought the longer tube. Granted the 10" tube makes a smaller carry package the extra weight of the 14" tube comes in handy when shooting heavier loads.

Re: Help with new contender barel [Re: 500WE] #42787 12/22/2008 3:00 PM
Joined: Feb 2008
Posts: 2,434
H2OBUG Offline
Pooh-Bah
Offline
Pooh-Bah
Joined: Feb 2008
Posts: 2,434
Keep in mind that the new T/C barrels have a the chamber cut different. The new barrels have much like a forcing cone cut in them. The old barrel I had was cut much like a rifle with very little freebore. The newer barrels have much more freebore and allow you to shoot the 300 XTP bullets seated out with the longer OAL.


If it jams force it! If it breaks it needed replacing anyway.
Re: Help with new contender barel [Re: H2OBUG] #42810 12/22/2008 5:02 PM
Joined: Dec 2008
Posts: 77
MOHunter Offline
journeyman
Offline
journeyman
Joined: Dec 2008
Posts: 77
Hey H20BUG or anyone else......do you have any experience or know if this freebore on the new barrels affects accuracy with cast bullets in the .44 barrel?....I seem to think that this freebore on my .357 T/C negatively affects accuracy....Jacketed bullets are fine but cast has given me headaches....

....I am also in the market for a .44 barrel and have been following this thread.....don't want to hijack it or anything....

...thanks folks!.....and Happy Holidays!

Re: Help with new contender barel [Re: MOHunter] #42825 12/22/2008 6:38 PM
Joined: Feb 2008
Posts: 2,434
H2OBUG Offline
Pooh-Bah
Offline
Pooh-Bah
Joined: Feb 2008
Posts: 2,434
This is the best explination of what happens that I have seen.

http://www.bellmtcs.com/store/index.php?cid=120

I know the old T/C barrels were not like this. I am not sure when they stated this. It does make a differance in how they shoot and bullet selection


If it jams force it! If it breaks it needed replacing anyway.
Re: Help with new contender barel [Re: H2OBUG] #42829 12/22/2008 7:08 PM
Joined: Dec 2008
Posts: 77
MOHunter Offline
journeyman
Offline
journeyman
Joined: Dec 2008
Posts: 77
........thanks!

Re: Help with new contender barel [Re: H2OBUG] #42830 12/22/2008 7:21 PM
Joined: Aug 2008
Posts: 142
N.E.S. Offline OP
member
OP Offline
member
Joined: Aug 2008
Posts: 142
Ok so far it is close between the 10" & 12" still can't deside
Someone said that the recoil with a 12" is brutal

I thought a longer barrel would be less recoil, sure need to know before I get one

I have a 44 wheelgun with 8 3/8" ported barrel recoil is not bad
Don't won't any more recoil than it is

Can anyone help with this ?
Tell me about the recoil
THANKS
N.E.S.

Re: Help with new contender barel [Re: N.E.S.] #42833 12/22/2008 7:34 PM
Joined: Feb 2008
Posts: 2,434
H2OBUG Offline
Pooh-Bah
Offline
Pooh-Bah
Joined: Feb 2008
Posts: 2,434
I don't know who told you a 12" 44Mag was brutal but mine is not much worse than any other 44 or 45 I have ever shot (It ain't no 22LR but it is not a killer---no problem to shoot 50-100 rounds at the range). If you want brutal try a stoked up 454 or 500 S&W in a 12" encore -- whole new level of recoil

That is why I love the 44's and 45's you know you have shot something but it does not abuse the shooter.

My 10" had a bit more muzzle rise than the 12" I like the long forearm in the 12" too


If it jams force it! If it breaks it needed replacing anyway.
Re: Help with new contender barel [Re: H2OBUG] #42837 12/22/2008 8:51 PM
Joined: Aug 2008
Posts: 142
N.E.S. Offline OP
member
OP Offline
member
Joined: Aug 2008
Posts: 142
lhunter03 is the one that said the 12" was brutal
Took me by supprise, I love to shoot my 44 revolver,
Not worred about it, still need to deside on a barrel length
Any one know, does a contender have more recoil than a revolver?

Re: Help with new contender barel [Re: N.E.S.] #42843 12/22/2008 10:21 PM
Joined: Jan 2005
Posts: 7,655
wapitirod Offline
Shootist
Offline
Shootist
Joined: Jan 2005
Posts: 7,655
recoil is a subjective thing, what is bad to you may not be so to others, everyone has their own tolerances and the only way to know for sure if something is going to bother you is to try. I used to get bored shooting ground squirrels with my 22 and I'd take out my 458 Lott, most people wouldn't consider doing something like that but I enjoyed shooting that gun and was not recoil shy with it at all but most people can't shoot that cartridge well at all because of the recoil.


I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist


Re: Help with new contender barel [Re: 500WE] #42860 12/23/2008 12:51 AM
Joined: May 2008
Posts: 370
DeerDad Offline
enthusiast
Offline
enthusiast
Joined: May 2008
Posts: 370
I have a 10" barrel and very happy with it. I killed a 8 point that required a second shot at 100 yards and it worked fine. I had a along bushnell scope on it at the time. I have since removed the scope and installed iron sights. The 10 inch barrel is easier to move around with in a tree stand.

Re: Help with new contender barel [Re: DeerDad] #43094 12/26/2008 7:14 PM
Joined: Aug 2008
Posts: 142
N.E.S. Offline OP
member
OP Offline
member
Joined: Aug 2008
Posts: 142
Thanks for the input,guys buying a 7-30 waters barrel from rod, have to put the 44 on hold for awhile
Thanks
N.E.S.

Re: Help with new contender barel [Re: 500WE] #43115 12/27/2008 1:41 AM
Joined: Nov 2007
Posts: 36
GaryDowdy Offline
newbie
Offline
newbie
Joined: Nov 2007
Posts: 36
I like them all! But, all my barrels (2) are 14"


Gary D. Dowdy

Moderated by  Chance Weldon, Gary, Gregg Richter 

Newest Members
Redhawk41, Striker243, Sxviper, RobbieD, IRONMAN
9668 Registered Users
Top Posters(30 Days)
Who's Online Now
0 registered members (), 138 guests, and 3 spiders.
Key: Admin, Global Mod, Mod
Powered by UBB.threads™ PHP Forum Software 7.7.3