 Begera Barrels
#66200
03/11/2010 2:55 AM
|
Joined: Feb 2008
Posts: 2,434
H2OBUG
OP
Pooh-Bah
|
|
OP
Pooh-Bah
Joined: Feb 2008
Posts: 2,434 |
Does anyone have have a Begera Barrel??
I am looking at a full bull 26" .223 It uses a Muzle loader forend.
Many say they are great I am not sold though
The price is right for arond $200
If it jams force it! If it breaks it needed replacing anyway.
|
|
|
|
Re: Begera Barrels
[Re: H2OBUG]
#66207
03/11/2010 4:42 AM
|
Joined: Feb 2010
Posts: 95
Ellis Prairie
journeyman
|
|
journeyman
Joined: Feb 2010
Posts: 95 |
I bought a 223 Bergara, Encore barrel from Natchez ($166.85) last year
I havn't shot it much,but I think its going to be a keeper the only load I've,tried shot .545 at 100 yards. The one thing I don't like about this barrel is its chambered in 223. Don't guess I should gripe about that I'm the one that ordered it. THE price was right & I
had a ton of 223 brass & bullets.
|
|
|
|
Re: Begera Barrels
[Re: Ellis Prairie]
#66215
03/11/2010 6:23 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
If you go to Mike Bellms website he is really big into them now and has alot of good stuff to say about them. Mike is another really nice guy that is easy to talk to and has alot of experience and information he's willing to share.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
|
Re: Begera Barrels
[Re: wapitirod]
#66216
03/11/2010 6:34 AM
|
Joined: Sep 2007
Posts: 7,331
TCTex.
Shootist
|
|
Shootist
Joined: Sep 2007
Posts: 7,331 |
I think I would rather buy one of those that a TC factory barrel...
Democracy is two wolves and a lamb deciding what to have for dinner. Liberty is a well armed lamb Benjamin Franklin 
|
|
|
|
Re: Begera Barrels
[Re: TCTex.]
#66270
03/12/2010 4:07 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
I think I would rather buy one of those that a TC factory barrel... That's why Bellm is into them so much, he says they are very accurate barrels.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
|
Re: Begera Barrels
[Re: wapitirod]
#66296
03/12/2010 5:00 PM
|
Joined: Jan 2004
Posts: 570
huntkng
addict
|
|
addict
Joined: Jan 2004
Posts: 570 |
Years ago I used two of their bbls on rifle projects. I'm pretty sure it was the same company. I used a .338 and a .308 blank, they did just fine and were just as accurate as the Douglas bbls I had been using.
Bill in OR
|
|
|
|
Re: Begera Barrels
[Re: huntkng]
#66380
03/14/2010 2:33 AM
|
Joined: May 2009
Posts: 178
geojanitor
member
|
|
member
Joined: May 2009
Posts: 178 |
I've got a 270 Begera tube and it is a shooter!!! I plan on picking up a 7-08 when natchez gets them back in stock, chucking it up in the lathe, dropping it to 15" and finishing it with a nice target crown.
|
|
|
|
Re: Begera Barrels
[Re: geojanitor]
#66383
03/14/2010 2:47 AM
|
Joined: Feb 2010
Posts: 95
Ellis Prairie
journeyman
|
|
journeyman
Joined: Feb 2010
Posts: 95 |
I've got a 270 Begera tube and it is a shooter!!! I plan on picking up a 7-08 when natchez gets them back in stock, chucking it up in the lathe, dropping it to 15" and finishing it with a nice target crown. Great minds think a like only diff I'm thinking 16"
|
|
|
|
Re: Begera Barrels
[Re: geojanitor]
#66403
03/14/2010 7:00 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
I've got a 270 Begera tube and it is a shooter!!! I plan on picking up a 7-08 when natchez gets them back in stock, chucking it up in the lathe, dropping it to 15" and finishing it with a nice target crown. Like I was saying in my earlier post you might check with Mike Bellm as he is dealing in bergera now, He may even have one already cut to length. If your not familiar with Mike he is a top notch T/C guy but hasn't got the noteriety of J.D. Jones. I buy oversized hinge pins for Contenders and Encores I work on as well as springs as well as special tools and manuals. Anyways just a thought if you don't want to wait for Natchez.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
|
Re: Begera Barrels
[Re: H2OBUG]
#66470
03/15/2010 4:26 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
in case you haven't been to his site yet here is the link to what Mike Bellm calls the Bergera Barrel Accuracy Gallery, this may answer alot of your questions if you haven't looked at it yet. http://www.bellmtcs.com/store/index.php?cid=469
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
|
|
0 registered members (),
101
guests, and 2
spiders. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
