Thats pretty much how I obtained the JDJ, complete as you see it in the pic above. Picked it up from a fella online who needed money for another project. I paid $700 for it shipped to my local FFL, including the custom Williams brake, an action job and the new box of TC ammo. The Leupy scope and Georgia Jim wood alone will run you $700. To build a twin would cost ya $1500+.

TCTex those are some pretty rigs you have there!

Tex the wood on that top contender is what?I love the greens in it its beautiful.

Cotton, I really like the laminate woodwork that I have been getting from GeorgiaJim over on Specialty Pistols.







I have to admit, one of my favorites is this one...

They do look cool!

Here's another view of cottonstalk's new revolver and my maximum.

Whit, I am drooling over those two beautiful pieces...

Whit what is cottons gun? Caliber?

It's a Ruger, converted by Jack Huntington to .500 JRH with his extended grip frame. It shoots even better than it looks!

Ruger Single-Six with custom grip frame.



Custom Ruger Blackhawk chambered in 218 Mashburn Bee.



Top right: T/C Contender chambered in 7mm GNR. Left: T/C Contender chambered in 257 Raptor. Center: T/C Contender chambered in 309 JDJ. All guns wear Weaver 2.5 x 8 scopes.



Top: Ruger Redhawk chambered in 429 GNR w/Bushnell Trophy 2 x 6 scope. Center: T/C Contender with Pirate barrel chambered in 356 GNR w/Leupold 4x scope. Bottom: Custom Ruger chambered in 510 GNR.



Here is the 510 GNR as I first had it built with a 8" barrel and scope.



I later replaced the barrel with a 6" and removed the scope.



Savage Striker in 260 Remington w/ Burris 3 x 12 scope.



Top: T/C Encore in 378 GNR w/Burris 2 x 7 scope. Bottom: T/C Contender in 221 Fireball w/Burris 3 x 12 scope.



Top left: Dan Wesson in 357 magnum. Top right: Ruger MKII w/red dot. Center: Ruger SBH w/Burris 3x scope.



Top: T/C Encore in 338 GNR w/Burris 2 x 7 scope. Bottom: T/C Encore in 6mm BR w/Leupold 2.5 x 8 scope.

VERY NICE!!

You have many great guns! How do you like the 378 GNR?

The 378 GNR is a great caliber. I have more confidence in this round than any other. My gun shoots 225 gr. Hornady's, 260 gr. Nosler BT's and Accubonds, and 270 gr. Hornady's into 1.5" at 100 yards. The 260 grains travel at 2345 fps. and I can push the 225 grain bullets to almost 2500 fps. if I choose. It is overkill for many of the animals I have taken, but dead is dead.

I know what you mean Randominator, I hunt with a 376 Steyr alot. If I could only have one gun, it would be #1. Great range and power for everything & anything I'll ever hunt.

Gorgeous guns! Definitely a lot of beautiful custom pieces here.

Magnaport Razorback Flattop

Close-up

VERY nice!

Magnaport Predator Bisley

Another beautiful revolver!

Thanks Whit, I finally figured out how to post pics. When it comes to computers, Im a little slow

Heres my Redhawk .45 LC. No .454 for me!

Man, I really like that! I have a 4-inch Redhawk in .454, but it gets fed a steady diet of heavy .45 Colt.

Thanks for posting!

This came yesterday from Clements. It is a 44 mag that David did his tune on. He also added a 6.5 inch Express barrel. Gonna order a set of grips from Cary Chapman to finish it off.

Beautiful revolver, magman!!

this is one I'm just finishing up for a customer.
this is a 45 Flattop I'm just finishing up. I found some blemishes in the blue so I'm going to re blue it. The barrel has been shortened to 3.5", with an Alpha Precision front sight. The grips are malted maple from Privates. The action is tuned to 2lbs and the ACP cylinder I modified to also except 45 Auto Rim. It has a mid frame Sheriffs model belt mtn base pin

Huntington built 475L











Now one for the art lovers. This one is a 41 mag alsobuilt by Jack Huntington. The engraving I believe was done by Paul Linkey

You mean grafitti?

Wow, that's nice, Rod!

The factory scrollwork on my Bisley drives me nuts......

Not my cup o' tea. He does nice work tho.

Me too -- I am having it removed.

Don't confuse real, quality engraving with lazer etching.

I think it all looks a big gaudy. JMO.

I can't believe tha tyou would call the beautiful world class hand engraving by Paul ( Guild member) grafitti

Now that hideous laser etching I would agree

What can I say, I just don't care for that stuff personally. Clean is mean!

He does nice work, it just won't be on any of my guns ;-)

Engraving is definitely an art and one which I won't even try but it's also a personal thing. I've thought I'd like an old Colt SAA or S&W Schofield with engraving and maybe a nice Henry or Winchester to match it but not for a work gun. I have a couple of the lazer engraved guns and they piss me off because I can part them out to build better guns out of them.

I like plane guns for hunting but I can surely appriciate the beautiful artwork that folks do on guns. jwp, that is a beautiful gun.

After spending a very long while looking at 20 pages of awesomeness, I have decided it would be a shame not to resurrect this thread.

I present to you the Prasac Plinker. A 44 Mag Super Blackhawk sporting a tapered 10.5inch tube and Hogue toadskins (monogrips).

Now lets see some more!

I agree! 20 pages of "I want that...and that....and that..." But here is what I DO have.






The top one is my custom 500JRH done by Jack Huntington. It used to be a beat up Ruger Super Blackhawk in 44mag. Next is the 460S&W Encore. Then the Colt Anaconda in 45 Colt. Yes, I said 45 Colt, not 44 mag. :-) Then my MKIII that now wears a scope. And last but CERTAINLY not least, my everyday carry gun, the #1 gun on my bucket list, the Springfield TRP that now wears wood grips. Best shooting 1911 I've ever had. Never failed no matter what I feed it.

Old thread, new photo's; I like it!

FA FG 44Mag...


FA PG 353 Casull....


FA FG 454 Casull with 45 Colt and 45 WinMag cylinders...


FA PG 44Mag....


FA M97 22LR with 22Mag cylinder...


FA M97 45 Colt...


'Tender with 50cal Muzzleloader barrel...

Bisley Hunter 44Mag...

Kral, where are you getting those knives? I like 'em!