Previous Thread
Next Thread
Print Thread
Wolff Trigger Return Springs #139377 12/22/2013 2:44 PM
Joined: Oct 2013
Posts: 533
Duke3026 Offline OP
addict
OP Offline
addict
Joined: Oct 2013
Posts: 533
I'm getting ready to change out the factory springs to 30oz ones.On two single sixs, and a Bisley hunter. Wanted to know, from you guys who have replaced them.What type of trigger pull weight you have been averaging vs.factory.

Re: Wolff Trigger Return Springs [Re: Duke3026] #139396 12/22/2013 6:47 PM
Joined: Jan 2005
Posts: 7,655
wapitirod Offline
Shootist
Offline
Shootist
Joined: Jan 2005
Posts: 7,655
with the 30 oz spring and no sear work you will get between 2 and 2.5# with a bit of creep. If your going to do any sear work step up to the 40oz and if you've done the sear work correctly you will end up with the same pull weight but no creep.


I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist


Re: Wolff Trigger Return Springs [Re: wapitirod] #139428 12/23/2013 10:51 AM
Joined: Oct 2013
Posts: 533
Duke3026 Offline OP
addict
OP Offline
addict
Joined: Oct 2013
Posts: 533
Thanks Wapitirod! I did one of the single sixs last night. And as you stated it fell just a few ounces over the two pound range. I'll have to order up some of those 40oz for the other two guns. Thanks


Moderated by  Chance Weldon, Gary, Gregg Richter 

Newest Members
Redhawk41, Striker243, Sxviper, RobbieD, IRONMAN
9668 Registered Users
Top Posters(30 Days)
Who's Online Now
0 registered members (), 66 guests, and 3 spiders.
Key: Admin, Global Mod, Mod
Powered by UBB.threads™ PHP Forum Software 7.7.3