Rechambered TC barrels
#179540
03/19/2017 3:21 AM
|
Joined: Nov 2004
Posts: 685
Boartuff
OP
addict
|
OP
addict
Joined: Nov 2004
Posts: 685 |
Thought it might be interesting to see what everyone has had rechambered in the Contender and Encore platforms.
What was the original caliber and what was your choice for the new chambering?
Did you start with a factory barrel or custom?
Barrel length? How about resulting accuracy?
~BT~
|
|
|
Re: Rechambered TC barrels
[Re: Boartuff]
#179543
03/19/2017 12:12 PM
|
Joined: Nov 2012
Posts: 171
Buck_358
member
|
member
Joined: Nov 2012
Posts: 171 |
My Contender began life as a factory 35 Remington ?TC Super 14? with their ported brake ~1995. Not long after working with this setup, I sent the barrel to SSK and had it rechambered to the 358 JDJ with no other changes. I have had no issues in terms of accuracy; it will print 1 inch groups if I do my part. I have taken several deer with it over the years. B.
NRA Patriot Life Endowment HHI #6544
|
|
|
Re: Rechambered TC barrels
[Re: Buck_358]
#179545
03/19/2017 2:29 PM
|
Joined: Dec 2005
Posts: 1,048
wvhitman
old hand
|
old hand
Joined: Dec 2005
Posts: 1,048 |
I had a .30-30 Contender barrel rechambered to .309 JDJ by SSK years ago. I shot deer and groundhogs out to 350 with it regularly. It burned up in my house fire. Bought an original SSK .309 JDJ. Shoots the same. Never had problems with either barrel.
|
|
|
Re: Rechambered TC barrels
[Re: wvhitman]
#179546
03/19/2017 3:50 PM
|
Joined: Jan 2004
Posts: 3,205
KYODE
Shooting Expert
|
Shooting Expert
Joined: Jan 2004
Posts: 3,205 |
Ive never had a rechambered barrel......other than modifying a factory 35rem to accept a rimmed case. Of course the just adds a rim counter bore around the chamber mouth. OTT did do some throat modifications on a 300 win mag encore barrel for me yrs ago...... Trying to get it to shoot acceptable with 180gr bullets. That, along with different powder selection did the job.
Kentucky….no place like home.
|
|
|
Re: Rechambered TC barrels
[Re: KYODE]
#179550
03/19/2017 9:25 PM
|
Joined: Jan 2015
Posts: 860
karl
old hand
|
old hand
Joined: Jan 2015
Posts: 860 |
Well, it wasn't me that rechambered it, but I recently came into possession of a 12" 28gauge rifled pistol barrel that I was told came from a former muzzle loading barrel. It's ported and makes a ~16"pattern at 10 yards. At 20 yards there are game sized holes in the pattern. It's got a solid rib with a 2 bead sight. I think the sight is probably the only real advantage over the 45/410 barrel. Recoil is mild with little flip. Should make a nice trail walking/biking grouse barrel.
Last edited by karl; 03/19/2017 9:32 PM.
|
|
|
Re: Rechambered TC barrels
[Re: karl]
#179574
03/20/2017 1:21 PM
|
Joined: Jun 2004
Posts: 270
Randominator
enthusiast
|
enthusiast
Joined: Jun 2004
Posts: 270 |
I had Mike Bellm rechamber a 357 Magnum to 357 Maximum. I also rechambered a 7-30 Waters to 7mm GNR which is basically a 7-30 Waters Ackley Improved. Both barrels will shoot lights out.
Last edited by Randominator; 03/20/2017 1:21 PM.
NRA Life Member HHI Member VHA Member
"get busy living, or get busy dying"
|
|
|
Re: Rechambered TC barrels
[Re: Randominator]
#179581
03/20/2017 3:29 PM
|
Joined: Feb 2008
Posts: 28
cont35bb
newbie
|
newbie
Joined: Feb 2008
Posts: 28 |
I've had several done. .22Hornet to K-Hornet, several 30-30 to 30-30Ack (13,16.25,&21".223 to.223Ack then to .22-250Ack( then cut to 15")357Herret to 356Win & a 45ACP to 45Colt. The gnsmth "tweaked" the spring ,which allows shooting 45ACP,45WinMag&45Colt. All great shooters & IMO worthwhile. Still pondering something like 35Krag,35-303 or 358JDJ from a 35Rem. Have [2] 357RMaxs,35Bullberry&35Rem also. ( Like I need another .35 !!)
|
|
|
Re: Rechambered TC barrels
[Re: cont35bb]
#179631
03/22/2017 3:09 AM
|
Joined: Nov 2004
Posts: 685
Boartuff
OP
addict
|
OP
addict
Joined: Nov 2004
Posts: 685 |
I sent a carbine 30/30 barrel to SSK a couple weeks ago to have it rechambered to Ackley, so should have it back anytime. This is for a G2 my niece regularly deer hunts with. I intend to do the same with a 14" barrel when I come across one.
~BT~
|
|
|
Re: Rechambered TC barrels
[Re: Boartuff]
#179640
03/22/2017 9:59 PM
|
Joined: Nov 2010
Posts: 23
348
stranger
|
stranger
Joined: Nov 2010
Posts: 23 |
I rechambered a 45-70 to 45-90 Winchester. I used a Bergara encore rifle barrel as the base and a PTG reamer. Turned out great, accuracy is great and it's neat to use the same cartridge my great grandfather used.
|
|
|
Re: Rechambered TC barrels
[Re: 348]
#179642
03/22/2017 11:25 PM
|
Joined: Sep 2016
Posts: 488
Handgun400
addict
|
addict
Joined: Sep 2016
Posts: 488 |
I didn't need a rechambered barrel until I read this post. But still I don't know what I need to change from and to: 223 Rem, 7-08 (which shoots lights out) or .460 S&W Mag? Maybe I need a new barrel just so I can rechamber it.
This forum should be renamed into handgunhunterphanaticenablers.com! I thank you all. The wife, not so much.
My filter is broken.
|
|
|
Re: Rechambered TC barrels
[Re: Handgun400]
#179643
03/23/2017 1:18 AM
|
Joined: Sep 2013
Posts: 4,669
Chance Weldon
Distinguished Expert
|
Distinguished Expert
Joined: Sep 2013
Posts: 4,669 |
This forum should be renamed into handgunhunterphanaticenablers.com! I thank you all. The wife, not so much. You're welcome.
Formerly TN Lone Wolf
"We are only as strong as we are united, as weak as we are divided." - J.K. Rowling
|
|
|
Re: Rechambered TC barrels
[Re: Chance Weldon]
#179674
03/24/2017 1:54 AM
|
Joined: Nov 2004
Posts: 685
Boartuff
OP
addict
|
OP
addict
Joined: Nov 2004
Posts: 685 |
Decide on anything yet, Handgun400?
~BT~
|
|
|
Re: Rechambered TC barrels
[Re: Handgun400]
#179681
03/24/2017 4:47 AM
|
Joined: Jan 2005
Posts: 7,655
wapitirod
Shootist
|
Shootist
Joined: Jan 2005
Posts: 7,655 |
As long as bore and twist match the desired caliber it's no biggie. My buddy Mike Bellm cuts the cleanest most precise chamber in the business bar none. I spent some time with him trying to learn his method but it would take more time than I had. Right now I've just re chambered a 15" 45-70 Encore barrel to 458 Lott which will also allow the use of 458 Win Mag ammo. Because the 45-70 twist is designed for lighter bullets I usually run 350gr Hornady RNSP bullets but accuracy with 500gr solids was acceptable. I have a 24" 45-70 barrel on the way that I am going to cut back and chamber in 450 Nitro Express and for it I am loading 450gr Swift A-Frames. The other project going at the moment is an experiment. Since TC doesn't make a factory .511 barrel I have a 15" 500S&W barrel with the muzzle tamer coming and I am going to chamber it in a modified 500 Nitro Express. My initial loads will be with .500, 500gr Hornady XTP's but I am already working on a proprietary hard cast design through Mountain Molds in the 550gr to 600gr range. The largest I've done in the past were the Lott's. That is the only time a handgun has set me back enough to have to take a step backwards so the Nitros should be interesting although they are lower pressure loads.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them. John Wayne-The Shootist
|
|
|
Re: Rechambered TC barrels
[Re: wapitirod]
#179778
03/27/2017 3:02 PM
|
Joined: Jan 2004
Posts: 802
Hawkeye
old hand
|
old hand
Joined: Jan 2004
Posts: 802 |
I have an old, very early 30-30 Contender rifle barrel, tapered that was rechambered by SSK into a 309JDJ and cut to 15". No break. It has been the most accurate Contender barrel I have. I shoot 150grn Ballistic Tips and have taken whitetail out to 350 from a shooting blind and rest. I have a TC 2.5x7x28 scope and it has served me through several hundred rounds. I have other SSK barrels but this is the only rechamber. Mike
You don't quit playing because you get old, You get old because you quit playing.
|
|
|
Re: Rechambered TC barrels
[Re: Handgun400]
#180065
04/06/2017 1:23 PM
|
Joined: Nov 2004
Posts: 685
Boartuff
OP
addict
|
OP
addict
Joined: Nov 2004
Posts: 685 |
I received my 30-30 barrel back this week that I sent to SSK for rechambering to Ackley Improved and hopefully I can get in some range time this weekend for fireforming brass. I'm starting out with factory loaded Federal ammo for this task.
~BT~
|
|
|
|
1 registered members (Okie Hunter),
48
guests, and 2
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|